WEBVTT

00:00:00.000 --> 00:00:02.250
Hey everyone, this is a

00:00:02.250 --> 00:00:05.770
review of RhinoRamps.

00:00:06.450 --> 00:00:07.350
I have four

00:00:07.367 --> 00:00:10.627
four of them here so that I
can prop up all four

00:00:10.627 --> 00:00:13.267
wheels in my 2023 Ford
Transit

00:00:13.267 --> 00:00:16.747
250 and I'm going to be
using them

00:00:16.747 --> 00:00:17.667
today to

00:00:17.667 --> 00:00:20.867
install some things in my
van and giving a review.

00:00:20.933 --> 00:00:23.403
Now these are the
RhinoRamps MAX.

00:00:31.967 --> 00:00:35.367
So, to install the running
boards it wants me to

00:00:35.367 --> 00:00:37.887
loosen these plastic clips

00:00:37.887 --> 00:00:40.887
on the trim here
underneath

00:00:40.887 --> 00:00:43.627
the passenger side of my
Transit.

00:00:44.667 --> 00:00:47.507
And so I'm going to go
ahead and see if I can
record myself

00:00:47.507 --> 00:00:48.267
doing that.

00:00:49.907 --> 00:00:52.507
It says don't take off the
trim but just loosen it which
is

00:00:52.507 --> 00:00:54.987
good because I bedlinered
my trim.

00:00:56.047 --> 00:00:59.447
But it says I should just be
able to stick a flathead

00:00:59.447 --> 00:01:01.067
in here.

00:01:01.260 --> 00:01:02.960
And then pull this

00:01:02.960 --> 00:01:05.040
down.

00:01:07.240 --> 00:01:10.500
It's a little difficult to do
with one hand.

00:01:10.757 --> 00:01:13.297
That saying once I stick the
flathead in there it should

00:01:13.297 --> 00:01:16.237
just kind of come down.

00:01:17.037 --> 00:01:20.037
It appears like it is loosening
up.

00:01:23.017 --> 00:01:25.437
It's almost like you have to

00:01:25.437 --> 00:01:28.037
pry it a little bit off.

00:01:29.097 --> 00:01:32.197
It definitely can get my
fingers in that small space

00:01:32.197 --> 00:01:32.817
there.

00:01:33.097 --> 00:01:33.477
Interesting.

00:01:34.877 --> 00:01:35.877
So that's what you do.

00:01:36.657 --> 00:01:38.777
I'm going to have to try to
do it with two hands here.

00:01:38.867 --> 00:01:42.147
So, I'm underneath the
passenger side of the

00:01:42.147 --> 00:01:45.527
van and installing the

00:01:45.527 --> 00:01:46.767
running board here.

00:01:47.887 --> 00:01:50.647
And I'm just showing you
how it's installed.

00:01:51.107 --> 00:01:54.487
So, you have, this is a, this

00:01:54.487 --> 00:01:56.307
is a factory hole here.

00:01:57.027 --> 00:01:57.927
And then you have the bolt.

00:01:59.067 --> 00:02:01.547
This is being held by this
plastic retainer.

00:02:02.707 --> 00:02:06.127
But also, there's something
behind

00:02:06.127 --> 00:02:08.587
there that basically catches

00:02:08.587 --> 00:02:09.787
inside.

00:02:10.147 --> 00:02:13.727
And then I drill these two
holes and we have

00:02:13.727 --> 00:02:14.627
these clips here.

00:02:15.087 --> 00:02:16.667
So, then I'm going to put
this,

00:02:17.747 --> 00:02:21.027
I'll show you after I'm done,
I'm going to put

00:02:21.027 --> 00:02:24.367
the bracket on there that's
attached to the running

00:02:24.367 --> 00:02:24.727
board.

00:02:25.087 --> 00:02:27.627
And then these are the
factory studs and the
bracket mounts

00:02:27.627 --> 00:02:31.107
on those. So, I'll show you all
this when I'm

00:02:31.107 --> 00:02:31.307
done.

00:02:31.467 --> 00:02:34.387
So you can see here we got
our bracket.

00:02:35.627 --> 00:02:38.967
These are the two factory
studs.

00:02:39.187 --> 00:02:42.547
There's a washer and then a
nut there and

00:02:42.547 --> 00:02:45.667
then I drilled those holes

00:02:45.667 --> 00:02:49.027
and you use these retainer
clips.

00:02:49.807 --> 00:02:53.407
I clip onto the metal

00:02:53.407 --> 00:02:56.527
there right behind the
plastic trim

00:02:56.527 --> 00:02:57.927
and

00:02:58.320 --> 00:03:01.860
there's a locking washer and
a regular

00:03:01.860 --> 00:03:05.280
washer and a nut or in a
bolt

00:03:05.280 --> 00:03:07.380
and so then you

00:03:07.380 --> 00:03:10.640
fasten that on to the

00:03:10.640 --> 00:03:12.260
chassis there.

00:03:12.617 --> 00:03:16.077
And then this whole
mounting bracket as you
can see

00:03:16.077 --> 00:03:19.197
mounts to the running
board.

00:03:19.603 --> 00:03:22.083
So that's how it

00:03:22.083 --> 00:03:25.483
attaches to the underside
here.

00:03:25.623 --> 00:03:26.703
I'm on the passenger side.

00:03:26.867 --> 00:03:29.507
So here's the finished
product

00:03:29.507 --> 00:03:32.827
on the passenger side with
the running board.

00:03:33.247 --> 00:03:35.227
I'm very happy with the way
it looks.

00:03:35.867 --> 00:03:38.827
And the finish on it actually
matches the bed liner

00:03:38.827 --> 00:03:41.987
perfectly. Looks like they
put on some bed liner

00:03:41.987 --> 00:03:43.167
themselves.

00:03:43.443 --> 00:03:46.143
And so looks really nice.

00:03:46.397 --> 00:03:49.877
So one thing about this is it
doesn't run all the way

00:03:49.877 --> 00:03:51.937
to the back tires because I
have the extended version.

00:03:52.317 --> 00:03:55.597
But it still looks fine and it
matches

00:03:55.597 --> 00:03:58.937
up with the the the doors
really

00:03:58.937 --> 00:04:00.577
well where you would do it.

00:04:00.860 --> 00:04:04.440
So overall really

00:04:04.440 --> 00:04:05.200
happy with it.

00:04:05.760 --> 00:04:07.480
Still needs to do the driver
side though.
