WEBVTT

00:00:03.110 --> 00:00:06.090
Hi everyone, this is Steve with Project Freedom.

00:00:07.050 --> 00:00:11.310
I'm going to be working on my van here today doing RAPTOR spray

00:00:11.310 --> 00:00:15.710
on the plastic trim as well as the wheel wells

00:00:15.710 --> 00:00:18.350
in some of the bottom part of the van.

00:00:18.950 --> 00:00:21.090
So I'll show you what I'm going to do here.

00:00:21.307 --> 00:00:25.707
So basically I'm going to do it from there down to the bottom so I'm

00:00:25.707 --> 00:00:29.277
going to cover this white part here with the RAPTOR spray as well

00:00:29.277 --> 00:00:33.577
which takes a little bit different preparation because we have plastic

00:00:33.577 --> 00:00:36.717
molding and then we have the paint there.

00:00:37.757 --> 00:00:39.957
I'm going to do the same with the wheel well up front here.

00:00:41.197 --> 00:00:45.137
I'm going to do the hood with the RAPTOR spray

00:00:45.137 --> 00:00:47.833
and then the front bumper,

00:00:47.833 --> 00:00:47.847
and then the front bumper,

00:00:47.923 --> 00:00:51.683
So the steps I've taken thus

00:00:51.683 --> 00:00:55.883
far have been that I

00:00:55.883 --> 00:01:00.023
washed everything with soap and water first then I

00:01:00.023 --> 00:01:01.163
degreased everything

00:01:01.167 --> 00:01:05.527
then I sanded everything then I degreased everything again then I

00:01:05.527 --> 00:01:09.087
used a tack cloth which is like a sticky I've never used it before but

00:01:09.087 --> 00:01:09.900
if I got it

00:01:09.900 --> 00:01:09.907
if I got it

00:01:09.900 --> 00:01:14.380
from Home Depot it's a sticky cloth that gets all the little dust

00:01:14.380 --> 00:01:18.160
and specks off and then that's where I am now

00:01:23.167 --> 00:01:27.547
So I basically have my compressor here and as you can

00:01:27.547 --> 00:01:30.387
see the way it hooks up is

00:01:30.387 --> 00:01:34.787
the bottle actually thread up to and they provide a gun and

00:01:34.787 --> 00:01:39.267
a kit that I got and it's actually quite easy

00:01:39.267 --> 00:01:41.867
and spraying it's very easy

00:01:42.507 --> 00:01:46.727
everything is very black there after I did about

00:01:46.727 --> 00:01:51.047
two full coats of the RAPTOR spray all

00:01:51.047 --> 00:01:51.527
around

00:01:54.067 --> 00:01:58.447
So I'm looking at it today after I've done the

00:01:58.447 --> 00:02:02.547
bedliner yesterday and I'm not sure if you can see

00:02:02.547 --> 00:02:05.547
this. I'm noticing a little bit of inconsistency

00:02:05.547 --> 00:02:10.027
in the evenness of

00:02:10.027 --> 00:02:14.327
the spray and you know probably from the

00:02:14.327 --> 00:02:18.747
sprayer but in some parts it has a little more sheen to it

00:02:18.747 --> 00:02:21.407
and others it's more flat.

00:02:21.607 --> 00:02:26.007
it looks a little uneven to me and so

00:02:26.007 --> 00:02:30.427
what I'm gonna do is get some more RAPTOR bedliner and

00:02:30.427 --> 00:02:34.487
then roll it on at least on the sides here because the sides are the

00:02:34.487 --> 00:02:35.807
most visible of course.

00:02:36.027 --> 00:02:38.467
I'm going to show you my application over here.

00:02:39.007 --> 00:02:43.247
And I'm hoping that this will result in a bit more

00:02:43.247 --> 00:02:45.327
of an even

00:02:45.327 --> 00:02:49.467
application to

00:02:49.467 --> 00:02:52.347
the side here.

00:02:53.327 --> 00:02:54.887
And so let's take a look.

00:02:55.947 --> 00:02:56.207
I'm going

00:02:56.207 --> 00:03:07.927
to

00:03:07.927 --> 00:03:10.587
roll through that throughout and we'll see how it comes out.

00:03:10.767 --> 00:03:14.867
So I've finished rolling and everything is definitely much more

00:03:14.867 --> 00:03:17.447
even after the rolling.

00:03:19.087 --> 00:03:20.327
It's it's much more even.

00:03:21.207 --> 00:03:25.607
The rolling, applying it that way makes the finish much glossier.

00:03:26.327 --> 00:03:28.967
It's like before it was quite matte.

00:03:29.147 --> 00:03:30.927
Now it's almost like a metallic finish.

00:03:31.047 --> 00:03:35.527
It's very shiny. I'm not sure if you can see this through

00:03:35.527 --> 00:03:38.487
the video, but the finish is very shiny.

00:03:39.327 --> 00:03:41.167
Not exactly what I wanted.

00:03:41.647 --> 00:03:43.907
I wanted more of a matte look, but that's alright.

00:03:44.407 --> 00:03:45.867
I'm still happy with it.

00:03:46.187 --> 00:03:46.987
It looks good.

00:03:47.200 --> 00:03:51.560
So here we have the final product and I'm extremely happy

00:03:51.560 --> 00:03:52.540
with how it turned out.

00:03:52.920 --> 00:03:56.740
It was worth the three full days of work and

00:03:56.740 --> 00:03:58.360
get a little bit closer.

00:03:58.660 --> 00:04:02.580
As you can see it's pretty shiny but I like it a lot.

00:04:03.600 --> 00:04:07.620
The lines are very clean even though the tape got rained

00:04:07.620 --> 00:04:12.080
on and I'm extremely happy with the way it

00:04:12.080 --> 00:04:12.560
looks.

00:04:13.680 --> 00:04:16.020
We'll go and take a look at the hood too.

00:04:17.060 --> 00:04:21.540
On this side how it turned out it looks very great

00:04:23.260 --> 00:04:26.260
and again very very happy with it.
