WEBVTT

1
00:00:03.110 --> 00:00:06.090
Hi everyone, this is Steve with Project Freedom.

2
00:00:07.050 --> 00:00:11.310
I'm going to be working on my van here today doing RAPTOR spray

3
00:00:11.310 --> 00:00:16.010
on the plastic trim as well as the wheel wells in

4
00:00:16.010 --> 00:00:18.350
some of the bottom part of the van.

5
00:00:18.950 --> 00:00:21.090
So I'll show you what I'm going to do here.

6
00:00:21.307 --> 00:00:25.567
So basically I'm going to do it from there down to the bottom so

7
00:00:25.567 --> 00:00:28.517
I'm going to cover this white part here with the RAPTOR spray as

8
00:00:28.517 --> 00:00:32.997
well which takes a little bit different preparation because we

9
00:00:32.997 --> 00:00:36.717
have plastic molding and then we have the paint there.

10
00:00:37.757 --> 00:00:39.957
I'm going to do the same with the wheel well up front here.

11
00:00:41.197 --> 00:00:45.137
I'm going to do the hood with the RAPTOR spray

12
00:00:45.137 --> 00:00:47.833
and then the front bumper,

13
00:00:47.923 --> 00:00:52.443
So the steps I've taken thus far

14
00:00:52.443 --> 00:00:55.883
have been that I

15
00:00:55.883 --> 00:01:00.623
washed everything with soap and water first then I degreased

16
00:01:00.623 --> 00:01:01.163
everything

17
00:01:01.167 --> 00:01:05.527
then I sanded everything then I degreased everything again then I

18
00:01:05.527 --> 00:01:08.607
used a tack cloth which is like a sticky I've never used it

19
00:01:08.607 --> 00:01:09.900
before but if I got it

20
00:01:09.900 --> 00:01:14.380
from Home Depot it's a sticky cloth that gets all the little dust

21
00:01:14.380 --> 00:01:18.160
and specks off and then that's where I am now

22
00:05:05.167 --> 00:05:09.907
So I basically have my compressor here and as you can see

23
00:05:09.907 --> 00:05:14.567
the way it hooks up is the bottle

24
00:05:14.567 --> 00:05:17.727
actually thread up to and they provide a gun and a kit that I got

25
00:05:17.727 --> 00:05:22.507
and it's actually quite easy and

26
00:05:22.507 --> 00:05:23.867
spraying it's very easy

27
00:06:59.507 --> 00:07:03.727
everything is very black there after I did about

28
00:07:03.727 --> 00:07:08.047
two full coats of the RAPTOR spray all

29
00:07:08.047 --> 00:07:08.527
around

30
00:07:11.067 --> 00:07:15.447
So I'm looking at it today after I've done the

31
00:07:15.447 --> 00:07:20.187
bedliner yesterday and I'm not sure if you can see this.

32
00:07:20.187 --> 00:07:24.847
I'm noticing a little bit of inconsistency in the

33
00:07:24.847 --> 00:07:29.127
evenness of the spray and

34
00:07:29.127 --> 00:07:33.387
you know probably from the sprayer but in some parts

35
00:07:33.387 --> 00:07:37.847
it has a little more sheen to it and others it's more

36
00:07:37.847 --> 00:07:38.407
flat.

37
00:07:38.607 --> 00:07:43.007
it looks a little uneven to me and so

38
00:07:43.007 --> 00:07:47.627
what I'm gonna do is get some more RAPTOR bedliner and then

39
00:07:47.627 --> 00:07:51.487
roll it on at least on the sides here because the sides are the

40
00:07:51.487 --> 00:07:52.807
most visible of course.

41
00:07:53.027 --> 00:07:55.467
I'm going to show you my application over here.

42
00:07:56.007 --> 00:08:00.247
And I'm hoping that this will result in a bit more

43
00:08:00.247 --> 00:08:04.767
of an even application

44
00:08:04.767 --> 00:08:09.347
to the side here.

45
00:08:10.327 --> 00:08:11.887
And so let's take a look.

46
00:08:12.947 --> 00:08:13.207
I'm going

47
00:08:13.207 --> 00:08:24.927
to

48
00:08:24.927 --> 00:08:27.587
roll through that throughout and we'll see how it comes out.

49
00:08:27.767 --> 00:08:31.867
So I've finished rolling and everything is definitely much more

50
00:08:31.867 --> 00:08:34.447
even after the rolling.

51
00:08:36.087 --> 00:08:37.327
It's it's much more even.

52
00:08:38.207 --> 00:08:42.607
The rolling, applying it that way makes the finish much glossier.

53
00:08:43.327 --> 00:08:45.967
It's like before it was quite matte.

54
00:08:46.147 --> 00:08:47.927
Now it's almost like a metallic finish.

55
00:08:48.047 --> 00:08:52.707
It's very shiny. I'm not sure if you can see this through the

56
00:08:52.707 --> 00:08:55.487
video, but the finish is very shiny.

57
00:08:56.327 --> 00:08:58.167
Not exactly what I wanted.

58
00:08:58.647 --> 00:09:00.907
I wanted more of a matte look, but that's alright.

59
00:09:01.407 --> 00:09:02.867
I'm still happy with it.

60
00:09:03.187 --> 00:09:03.987
It looks good.

61
00:09:06.200 --> 00:09:10.780
So here we have the final product and I'm extremely happy with

62
00:09:10.780 --> 00:09:11.540
how it turned out.

63
00:09:11.920 --> 00:09:15.740
It was worth the three full days of work and

64
00:09:15.740 --> 00:09:17.360
get a little bit closer.

65
00:09:17.660 --> 00:09:21.580
As you can see it's pretty shiny but I like it a lot.

66
00:09:22.600 --> 00:09:26.620
The lines are very clean even though the tape got rained

67
00:09:26.620 --> 00:09:31.080
on and I'm extremely happy with the way it

68
00:09:31.080 --> 00:09:31.560
looks.

69
00:09:32.680 --> 00:09:35.020
We'll go and take a look at the hood too.

70
00:09:36.060 --> 00:09:40.540
On this side how it turned out it looks very great

71
00:09:42.260 --> 00:09:45.260
and again very very happy with it.
