WEBVTT

00:00:00.256 --> 00:00:02.219
Hi, I'm Steve Smith with Camper Van

00:00:02.219 --> 00:00:05.526
Freedom. This is my BOEN socket adapter

00:00:05.547 --> 00:00:08.086
and reducer set. It was inexpensive,

00:00:08.277 --> 00:00:10.496
useful for the socket-wrench work I did,

00:00:10.496 --> 00:00:12.118
and I found the quality good.

00:00:12.245 --> 00:00:13.568
I recommend having a set for that

00:00:13.568 --> 00:00:15.385
kind of work. The useful distinction is

00:00:15.385 --> 00:00:17.262
what the adapters actually change in the

00:00:17.262 --> 00:00:19.780
tool setup. The matching product picture shows

00:00:19.780 --> 00:00:21.700
the adapters and reducers in their red

00:00:21.700 --> 00:00:24.814
case. They connect square-drive tools and sockets

00:00:24.814 --> 00:00:26.477
with different drive sizes.

00:00:26.688 --> 00:00:28.138
The drive connection is at the back

00:00:28.138 --> 00:00:29.887
of the socket. It is separate from

00:00:29.887 --> 00:00:31.637
the opening that fits over a nut

00:00:31.637 --> 00:00:33.642
or bolt, and separate again from the

00:00:33.642 --> 00:00:37.738
fastener thread. BOEN lists four adapters and

00:00:37.738 --> 00:00:40.028
four reducers in this eight-piece set.

00:00:40.141 --> 00:00:42.146
The female end receives the drive tool,

00:00:42.146 --> 00:00:43.725
and the male end connects to the

00:00:43.725 --> 00:00:46.669
socket. The diagram separates those two ends.

00:00:46.754 --> 00:00:49.698
An adapter increases the outgoing drive size,

00:00:49.698 --> 00:00:51.674
while a reducer steps it down.

00:00:51.814 --> 00:00:54.374
The markings describe that connection rather than

00:00:54.374 --> 00:00:55.483
a new bolt size.

00:00:55.483 --> 00:00:58.598
For example, a half-inch female to three-eighths-inch

00:00:58.598 --> 00:01:01.478
male reducer connects a half-inch drive tool

00:01:01.499 --> 00:01:03.795
to a three-eighths-inch drive socket.

00:01:03.913 --> 00:01:05.855
The socket still has its own fastener-opening

00:01:05.875 --> 00:01:07.710
size. That is why I compare the

00:01:07.710 --> 00:01:09.055
ends that need to join,

00:01:09.118 --> 00:01:10.867
instead of treating every number on the

00:01:10.867 --> 00:01:12.523
tool as the same measurement.

00:01:12.683 --> 00:01:15.115
My roof-mount photographs show the wider hardware

00:01:15.115 --> 00:01:18.423
context: profiles, connector plates and bolts.

00:01:18.614 --> 00:01:20.321
I used M five hardware at the

00:01:20.321 --> 00:01:23.350
smaller light-bar profile, and quarter-twenty hardware at

00:01:23.350 --> 00:01:26.149
the rack. The workshop footage illustrates measuring

00:01:26.149 --> 00:01:28.325
and holding work. The diagram keeps the

00:01:28.325 --> 00:01:30.927
fastener thread, the socket opening and the

00:01:30.927 --> 00:01:33.674
tool drive as three separate interfaces.

00:01:33.859 --> 00:01:35.181
The value for me was having a

00:01:35.181 --> 00:01:37.741
useful selection for socket-wrench work without spending

00:01:37.741 --> 00:01:40.429
much. My related VEVOR review covers the

00:01:40.429 --> 00:01:42.349
socket set I used constantly around the

00:01:42.349 --> 00:01:44.812
van. Its matching picture shows a separate

00:01:44.812 --> 00:01:47.799
kit, while the BOEN case here holds

00:01:47.799 --> 00:01:50.871
the drive-conversion pieces. They do different jobs

00:01:50.871 --> 00:01:52.397
in the wider tool collection.

00:01:52.557 --> 00:01:55.373
My page compares the LEXIVON socket adapter

00:01:55.373 --> 00:01:57.955
set and the NEIKO socket adapter set.

00:01:57.975 --> 00:01:59.533
Both are researched alternatives,

00:01:59.554 --> 00:02:01.488
each with its own matching picture.

00:02:01.672 --> 00:02:04.360
Their selections differ, so the included drive-size

00:02:04.360 --> 00:02:06.494
combinations are the useful comparison.

00:02:06.621 --> 00:02:08.669
My firsthand recommendation in this review is

00:02:08.669 --> 00:02:10.035
for the BOEN set I bought and

00:02:10.035 --> 00:02:11.628
used. Thanks for watching.

00:02:11.812 --> 00:02:13.883
I'm Steve Smith with Camper Van Freedom.

00:02:13.946 --> 00:02:16.656
We covered my BOEN adapters and reducers,

00:02:16.719 --> 00:02:18.469
their good value in my use and

00:02:18.469 --> 00:02:20.346
the difference between a drive connection and

00:02:20.346 --> 00:02:22.651
a fastener size. The full review,

00:02:22.799 --> 00:02:25.573
related socket-set account and current Amazon buying

00:02:25.573 --> 00:02:27.045
options are linked below.

00:02:27.151 --> 00:02:28.315
Until next time.