WEBVTT

00:00:00.299 --> 00:00:02.176
Hey, I'm Steve Smith with Camper Van

00:00:02.176 --> 00:00:04.821
Freedom. The HDX painter's plastic in my

00:00:04.821 --> 00:00:07.083
van-building kit offered a lot of coverage,

00:00:07.125 --> 00:00:08.789
but tearing was the problem I ran

00:00:08.789 --> 00:00:10.639
into. I worked mostly outdoors,

00:00:10.660 --> 00:00:13.007
and wind made thin plastic much harder

00:00:13.007 --> 00:00:15.055
to keep intact while painting and spraying

00:00:15.055 --> 00:00:18.041
bedliner. This was the twelve-foot by four-hundred-foot

00:00:18.041 --> 00:00:20.995
roll. Its broad sheet format suited covering

00:00:21.016 --> 00:00:22.894
areas around the coating work.

00:00:23.107 --> 00:00:24.707
The attraction was the amount of material

00:00:24.728 --> 00:00:26.733
for the money, because thicker plastic seemed

00:00:26.733 --> 00:00:28.626
expensive for the coverage I needed.

00:00:28.767 --> 00:00:30.773
Masking defines two different parts of a

00:00:30.773 --> 00:00:32.800
painting job: the area that gets coated

00:00:32.821 --> 00:00:34.741
and the area that stays covered.

00:00:34.911 --> 00:00:36.405
A sheet has to remain over that

00:00:36.405 --> 00:00:38.400
protected area throughout the spraying.

00:00:38.560 --> 00:00:40.331
A local edge and a large covering

00:00:40.352 --> 00:00:42.229
are different parts of the same layout.

00:00:42.229 --> 00:00:43.744
On my exterior project,

00:00:43.765 --> 00:00:45.813
I spent around eight hours masking the

00:00:45.813 --> 00:00:48.175
van and covering the unpainted areas.

00:00:48.402 --> 00:00:50.109
I sanded the exposed bodywork,

00:00:50.109 --> 00:00:51.752
blew away dust and cleaned it before

00:00:51.816 --> 00:00:54.888
spraying white-tinted bedliner. The photographs show my

00:00:54.888 --> 00:00:57.192
actual van during that coating project.

00:00:57.362 --> 00:00:59.475
The drawback appeared after the thin plastic

00:00:59.538 --> 00:01:00.997
was taped onto the van.

00:01:01.175 --> 00:01:03.094
It could tear, and a tear could

00:01:03.094 --> 00:01:04.866
let paint or bedliner reach an area

00:01:04.886 --> 00:01:06.103
I meant to protect.

00:01:06.422 --> 00:01:07.916
Instead of just having a covering in

00:01:07.916 --> 00:01:09.452
place, I had to think about whether

00:01:09.452 --> 00:01:11.214
that covering was still intact.

00:01:11.354 --> 00:01:13.530
Wind made that weakness more noticeable in

00:01:13.530 --> 00:01:15.130
my outdoor working setup.

00:01:15.236 --> 00:01:17.242
For me, the meaningful buying decision was

00:01:17.242 --> 00:01:20.100
thickness, rather than simply switching between brands

00:01:20.100 --> 00:01:22.153
of thin film. If I wanted plastic

00:01:22.216 --> 00:01:23.112
that held up better,

00:01:23.112 --> 00:01:24.478
I would spend more on a thicker

00:01:24.478 --> 00:01:27.550
material. My review compares another large roll,

00:01:27.593 --> 00:01:29.663
TRM Weatherall painter's plastic,

00:01:29.726 --> 00:01:33.566
and an individual Trimaco SuperTuff nine-by-twelve-foot drop

00:01:33.566 --> 00:01:36.016
cloth. Those are different buying formats to

00:01:36.016 --> 00:01:38.106
compare. Changing to one of those names

00:01:38.106 --> 00:01:39.963
alone is not a result I tested

00:01:39.984 --> 00:01:41.712
or a promise that it fixes tearing

00:01:41.733 --> 00:01:43.504
in wind. Thanks for watching.

00:01:43.568 --> 00:01:45.926
I'm Steve Smith with Camper Van Freedom.

00:01:46.021 --> 00:01:47.429
My takeaway is to think about the

00:01:47.429 --> 00:01:49.733
covering staying intact, not just how much

00:01:49.733 --> 00:01:51.526
plastic comes on the roll.

00:01:51.909 --> 00:01:53.914
Read the full HDX review for my

00:01:53.914 --> 00:01:57.051
outdoor masking experience and the two alternatives.

00:01:57.157 --> 00:01:58.524
See you on the next project.
