WEBVTT

00:00:00.256 --> 00:00:02.219
Hi, I'm Steve Smith with Camper Van

00:00:02.219 --> 00:00:04.565
Freedom. My SketchUp layout guide starts with

00:00:04.565 --> 00:00:06.400
the actual van and ends with a

00:00:06.400 --> 00:00:08.322
comparison you can take back into it.

00:00:08.324 --> 00:00:10.286
Measure the shell, block out the bed

00:00:10.286 --> 00:00:12.377
and furniture, reserve the finishes,

00:00:12.377 --> 00:00:14.681
and compare the same daily routine in

00:00:14.681 --> 00:00:17.483
two named arrangements. Keep the worksheet and

00:00:17.483 --> 00:00:19.617
model revision together, so a change in

00:00:19.617 --> 00:00:21.644
the drawing remains connected to the measurements

00:00:21.707 --> 00:00:23.351
and decisions behind it.

00:00:23.457 --> 00:00:25.505
Begin with the exact vehicle and one

00:00:25.505 --> 00:00:27.702
working unit. Record model year,

00:00:27.702 --> 00:00:30.732
wheelbase, body length and roof configuration.

00:00:30.859 --> 00:00:32.353
Measure widths at the floor,

00:00:32.438 --> 00:00:33.953
bed and cabinet heights,

00:00:34.017 --> 00:00:36.257
along with wheel wells and door openings.

00:00:36.363 --> 00:00:38.318
Note where each measurement was taken.

00:00:38.478 --> 00:00:41.678
Record planned floor, wall and ceiling build-up

00:00:41.678 --> 00:00:43.450
separately from the bare van.

00:00:43.598 --> 00:00:45.945
Keep unknown dimensions visible in the worksheet

00:00:45.945 --> 00:00:47.887
while the important values are checked.

00:00:48.078 --> 00:00:49.924
Choose a starting model deliberately.

00:00:50.105 --> 00:00:53.092
Review its source, vehicle configuration and any

00:00:53.092 --> 00:00:54.884
built-in finishes or furniture.

00:00:54.926 --> 00:00:57.358
Preserve an unchanged copy before adapting a

00:00:57.358 --> 00:01:00.153
working version. The Project Freedom design page

00:01:00.153 --> 00:01:01.945
provides an example from my build,

00:01:01.987 --> 00:01:05.124
while the downloaded-model checklist organizes source details

00:01:05.315 --> 00:01:08.075
and measurement differences. A starting file should

00:01:08.075 --> 00:01:10.037
keep its own identity as you create

00:01:10.037 --> 00:01:12.001
Layout A and Layout B.

00:01:12.171 --> 00:01:14.432
Block out the largest fixtures before refining

00:01:14.432 --> 00:01:17.056
textures. Keep the van shell separate,

00:01:17.098 --> 00:01:18.805
create a group for one fixture and

00:01:18.805 --> 00:01:20.811
work inside its editing context.

00:01:20.938 --> 00:01:22.795
Draw its footprint with Rectangle,

00:01:22.858 --> 00:01:24.949
entering the planned length and width with

00:01:24.949 --> 00:01:28.347
explicit units. Use Push/Pull to add the

00:01:28.347 --> 00:01:30.887
planned height. Leave the editing context,

00:01:30.950 --> 00:01:32.721
name the group and move the complete

00:01:32.870 --> 00:01:35.367
fixture into position. Check its dimensions before

00:01:35.387 --> 00:01:36.635
making the next box.

00:01:36.773 --> 00:01:39.014
Reserve finishes as named layers of space

00:01:39.034 --> 00:01:41.019
and keep furniture independent.

00:01:41.082 --> 00:01:43.643
Inspect the starting model before adding allowances,

00:01:43.770 --> 00:01:45.575
because it may already contain them.

00:01:45.671 --> 00:01:48.487
Count each floor, wall and ceiling assembly

00:01:48.487 --> 00:01:50.899
once, using the complete build-up.

00:01:50.962 --> 00:01:53.011
Groups let you move individual fixtures.

00:01:53.053 --> 00:01:55.783
Repeated components can share a definition; use

00:01:55.783 --> 00:01:57.746
Make Unique before changing the shape of

00:01:57.746 --> 00:02:00.153
just one instance. Keep raw edges and

00:02:00.153 --> 00:02:02.755
faces Untagged, and use tags on groups

00:02:02.755 --> 00:02:04.719
or components to manage visibility.

00:02:04.888 --> 00:02:07.107
Compare access with furniture open as well

00:02:07.107 --> 00:02:09.225
as closed. Choose the same routine in

00:02:09.225 --> 00:02:12.297
both arrangements: enter, reach a frequently used

00:02:12.297 --> 00:02:14.538
stored item, prepare the bed and return

00:02:14.601 --> 00:02:16.266
the space to daytime use.

00:02:16.436 --> 00:02:17.695
Keep the measured shell,

00:02:17.759 --> 00:02:20.563
finish assumptions and furniture sizes identical.

00:02:20.679 --> 00:02:22.898
Record passage, drawers, doors,

00:02:22.940 --> 00:02:25.628
bed use, usable storage and equipment service

00:02:25.628 --> 00:02:27.762
access in separate worksheet rows.

00:02:27.762 --> 00:02:30.492
Include the complete equipment removal route alongside

00:02:30.492 --> 00:02:33.327
routine service. Save a recoverable comparison in

00:02:33.327 --> 00:02:35.866
SketchUp for Web. Give separate working files

00:02:35.972 --> 00:02:38.810
distinct names and record why each exists.

00:02:38.959 --> 00:02:40.708
Trimble Connect keeps revisions,

00:02:40.708 --> 00:02:43.140
and the official saving guide explains manual

00:02:43.140 --> 00:02:45.477
saves, auto-saves and History.

00:02:45.593 --> 00:02:47.769
Save manually before closing and check the

00:02:47.769 --> 00:02:50.031
status. When inspecting an older version,

00:02:50.115 --> 00:02:51.822
choose whether to restore it or save

00:02:51.822 --> 00:02:53.998
a separate copy. Check the destination of

00:02:53.998 --> 00:02:55.684
a recovered browser backup too,

00:02:55.705 --> 00:02:57.273
because it starts as a new model.

00:02:57.347 --> 00:02:59.608
Thanks for watching. I'm Steve Smith with

00:02:59.608 --> 00:03:02.276
Camper Van Freedom. Review essential needs before

00:03:02.339 --> 00:03:05.070
preferences, then record the preferred arrangement,

00:03:05.070 --> 00:03:08.193
reason, unresolved question and next action.

00:03:08.370 --> 00:03:10.461
Test important footprints and movements with a

00:03:10.461 --> 00:03:13.171
full-size mockup and recheck the relevant openings

00:03:13.191 --> 00:03:14.856
before the next order or cut.

00:03:14.983 --> 00:03:17.864
My complete workflow, measurement worksheet and official

00:03:17.885 --> 00:03:19.949
SketchUp references are linked below.

00:03:20.135 --> 00:03:22.081
Until next time.
