WEBVTT 00:00:00.256 --> 00:00:02.176 Hi, I'm Steve Smith with Camper Van 00:00:02.176 --> 00:00:04.821 Freedom. This is my DEWALT ten-inch saw-blade 00:00:04.821 --> 00:00:06.784 pair. I was very happy with how 00:00:06.784 --> 00:00:08.107 these blades cut wood. 00:00:08.192 --> 00:00:09.557 My description was that they cut through 00:00:09.557 --> 00:00:11.073 it like butter, and I would recommend 00:00:11.093 --> 00:00:12.711 them. Here is how that pair fits 00:00:12.711 --> 00:00:14.460 into the woodworking side of my van-build 00:00:14.460 --> 00:00:16.551 kit. The recorded pair is the D 00:00:16.551 --> 00:00:20.359 W thirty-one zero-six P five construction combo. 00:00:20.496 --> 00:00:22.416 It contains a thirty-two-tooth blade and a 00:00:22.416 --> 00:00:25.467 sixty-tooth blade, both ten inches in diameter. 00:00:25.659 --> 00:00:28.133 DEWALT lists a five-eighths-inch arbor for the 00:00:28.133 --> 00:00:30.806 catalog combo. The matching pair picture and 00:00:30.806 --> 00:00:32.385 current Amazon buying link are on my 00:00:32.385 --> 00:00:33.879 full review page below. 00:00:34.049 --> 00:00:35.457 The two tooth counts are the useful 00:00:35.457 --> 00:00:37.143 distinction inside this pair. 00:00:37.249 --> 00:00:40.235 DEWALT describes general-purpose and fine-finish blades in 00:00:40.235 --> 00:00:42.774 the combo. The diameter describes the disc 00:00:42.774 --> 00:00:45.419 size, the arbor describes its center mounting 00:00:45.419 --> 00:00:47.425 hole, and the tooth count describes the 00:00:47.425 --> 00:00:48.919 cutting edge around the disc. 00:00:48.961 --> 00:00:51.222 Those are separate details to compare rather 00:00:51.222 --> 00:00:53.091 than one interchangeable number. 00:00:53.251 --> 00:00:55.683 My drawer photographs give the woodworking context 00:00:55.683 --> 00:00:57.561 from the van. I measured and cut 00:00:57.561 --> 00:00:59.225 timber, joined the frame, 00:00:59.310 --> 00:01:01.520 added the base and fitted the lining. 00:01:01.682 --> 00:01:03.794 The patio photograph shows the measured frame 00:01:03.815 --> 00:01:05.906 before the finished drawer photograph shows its 00:01:05.906 --> 00:01:09.404 rubber-lined interior. Material preparation came before those 00:01:09.404 --> 00:01:11.016 parts could be fitted together. 00:01:11.219 --> 00:01:13.566 The sequence diagram separates measuring, 00:01:13.608 --> 00:01:16.040 cutting and assembly. It is useful to 00:01:16.040 --> 00:01:17.832 see those as different stages because a 00:01:17.832 --> 00:01:20.136 cleanly cut piece is still only one 00:01:20.136 --> 00:01:21.235 part of the drawer. 00:01:21.394 --> 00:01:22.802 The pieces need to come together as 00:01:22.802 --> 00:01:24.765 a frame before the base and lining 00:01:24.765 --> 00:01:27.751 are fitted. The workshop footage illustrates measuring 00:01:27.751 --> 00:01:30.610 and holding timber alongside my actual drawer 00:01:30.610 --> 00:01:33.241 photographs. Wood and aluminum were separate cutting 00:01:33.241 --> 00:01:34.799 applications in my build. 00:01:34.948 --> 00:01:37.550 My aluminum extrusion work used an aluminum-cutting 00:01:37.550 --> 00:01:39.620 blade, and that worked well too. 00:01:39.726 --> 00:01:41.945 The COMOWARE twelve-inch blade has its own 00:01:41.945 --> 00:01:43.662 review and matching picture here. 00:01:43.757 --> 00:01:46.467 Its different diameter and material application belong 00:01:46.531 --> 00:01:48.899 to that separate cutting setup; this review 00:01:48.963 --> 00:01:51.053 keeps the ten-inch woodworking pair as its 00:01:51.053 --> 00:01:53.455 own product. The alternatives on my page 00:01:53.518 --> 00:01:55.716 are the Diablo D ten sixty X 00:01:55.737 --> 00:01:58.020 and the Freud L U eighty-three R 00:01:58.040 --> 00:02:01.198 zero-ten. The Diablo is a ten-inch sixty-tooth 00:02:01.198 --> 00:02:03.246 blade, while the Freud is a ten-inch 00:02:03.246 --> 00:02:06.549 fifty-tooth combination blade. They are researched buying 00:02:06.549 --> 00:02:09.686 alternatives. My firsthand recommendation in this video 00:02:09.835 --> 00:02:11.969 is for the DEWALT pair I reviewed. 00:02:12.053 --> 00:02:14.101 Thanks for watching. I'm Steve Smith with 00:02:14.101 --> 00:02:16.596 Camper Van Freedom. We covered my DEWALT 00:02:16.596 --> 00:02:18.900 ten-inch blade pair, its two tooth counts 00:02:18.900 --> 00:02:21.226 and my positive wood-cutting experience. 00:02:21.460 --> 00:02:23.807 The full review, drawer photographs, 00:02:23.807 --> 00:02:26.282 related cutting reviews and current Amazon buying 00:02:26.282 --> 00:02:27.818 options are linked below. 00:02:28.031 --> 00:02:28.969 Until next time.