WEBVTT

00:00:00.299 --> 00:00:01.664
Hey, I'm Steve Smith with

00:00:01.664 --> 00:00:03.797
Camper Van Freedom. My upper-cabinet

00:00:03.797 --> 00:00:05.205
notes include a picture of

00:00:05.205 --> 00:00:07.211
aluminum extrusion with a rounded

00:00:07.211 --> 00:00:09.408
outside corner. The useful distinction

00:00:09.429 --> 00:00:10.880
is in the shape: a

00:00:10.880 --> 00:00:12.885
rounded cross-section is different from

00:00:12.885 --> 00:00:14.421
a frame member bent along

00:00:14.421 --> 00:00:15.829
its length. I use that

00:00:15.829 --> 00:00:17.706
distinction to organize the cabinet-edge

00:00:17.706 --> 00:00:19.328
drawing before turning an appearance

00:00:19.328 --> 00:00:20.872
idea into a cut list.

00:00:21.007 --> 00:00:22.693
A rounded outside corner changes

00:00:22.713 --> 00:00:23.610
the face of a straight

00:00:23.610 --> 00:00:25.444
member. A curved cabinet run

00:00:25.444 --> 00:00:26.468
changes the path of the

00:00:26.468 --> 00:00:28.132
whole assembly. Put those two

00:00:28.132 --> 00:00:29.668
views beside each other: an

00:00:29.668 --> 00:00:31.034
end view for the profile,

00:00:31.034 --> 00:00:32.057
and a plan view for

00:00:32.057 --> 00:00:33.610
the cabinet run. Keep the

00:00:33.610 --> 00:00:35.444
supplier's actual dimensions with the

00:00:35.444 --> 00:00:37.045
selected part instead of deriving

00:00:37.066 --> 00:00:38.581
a size from a photograph.

00:00:38.687 --> 00:00:39.924
Start the edge drawing with

00:00:39.924 --> 00:00:41.646
the frame and panel together.

00:00:41.787 --> 00:00:43.067
Show whether the panel sits

00:00:43.067 --> 00:00:44.475
in a slot, against the

00:00:44.475 --> 00:00:45.841
frame or on a separate

00:00:45.841 --> 00:00:47.846
retainer. Add its finish and

00:00:47.846 --> 00:00:49.937
the intended exposed edge.

00:00:50.150 --> 00:00:51.302
Turn the drawing around to

00:00:51.302 --> 00:00:52.697
see the hidden side too.

00:00:52.810 --> 00:00:54.432
The aisle-facing surface is only

00:00:54.432 --> 00:00:55.520
one part of the finished

00:00:55.541 --> 00:00:57.398
detail. Then draw the connection

00:00:57.461 --> 00:00:58.443
to the next member.

00:00:58.528 --> 00:00:59.808
Mark the bracket or other

00:00:59.808 --> 00:01:01.600
proposed connector, and show where

00:01:01.600 --> 00:01:03.255
its fasteners would be reached.

00:01:03.415 --> 00:01:04.610
Keep those parts tied to

00:01:04.610 --> 00:01:06.339
the exact profile drawing.

00:01:06.359 --> 00:01:07.810
An outside width alone does

00:01:07.810 --> 00:01:09.431
not describe the slot or

00:01:09.431 --> 00:01:11.351
the hardware interface. Record an

00:01:11.351 --> 00:01:13.143
unresolved connection as an open

00:01:13.143 --> 00:01:14.423
choice while the assembly is

00:01:14.423 --> 00:01:16.193
being developed. Add the door

00:01:16.193 --> 00:01:17.516
and its intended movement to

00:01:17.516 --> 00:01:19.009
the same detail. Show the

00:01:19.009 --> 00:01:20.417
space taken by the panel,

00:01:20.417 --> 00:01:22.487
hinge arrangement and neighboring cabinet.

00:01:22.507 --> 00:01:23.787
Include the exposed ends of

00:01:23.787 --> 00:01:25.004
the frame and their intended

00:01:25.025 --> 00:01:26.798
treatment. Move through the planned

00:01:26.798 --> 00:01:28.442
positions rather than checking only

00:01:28.462 --> 00:01:30.126
the closed outline. That makes

00:01:30.126 --> 00:01:31.364
the cabinet depth and the

00:01:31.364 --> 00:01:32.729
nearby wall part of one

00:01:32.729 --> 00:01:34.828
layout question. Keep one record

00:01:34.892 --> 00:01:36.471
for the chosen edge: profile

00:01:36.471 --> 00:01:39.479
identity, drawing revision, panel interface,

00:01:39.500 --> 00:01:41.164
connections and door movement.

00:01:41.335 --> 00:01:43.084
Bring that complete detail back

00:01:43.084 --> 00:01:44.215
into the van model before

00:01:44.278 --> 00:01:45.872
preparing the finished pieces.

00:01:46.099 --> 00:01:47.337
My original reference is an

00:01:47.337 --> 00:01:49.555
edge-shape idea; the drawing records

00:01:49.555 --> 00:01:51.177
the assembly being considered.

00:01:51.305 --> 00:01:52.913
Thanks for watching. I'm Steve

00:01:52.913 --> 00:01:54.535
Smith with Camper Van Freedom.

00:01:54.662 --> 00:01:55.943
Start with the cross-section,

00:01:56.070 --> 00:01:57.435
then draw the whole cabinet

00:01:57.435 --> 00:01:59.200
edge. See you next time.
