Hey, I'm Steve Smith with Camper Van Freedom. My countertop notes started with a panel option. Turning that note into a useful build plan starts with the actual countertop outline. Mark the wall side, the aisle edge, the corners and the space underneath. Keep the material choice connected to that layout instead of letting the size of a purchased sheet decide the finished shape. The sheet size and the finished countertop size answer different questions. Record the final width, depth and any planned overhang in the layout. Then compare those dimensions with the material being considered. My original note is a record of an option, so I keep it separate from a claim that I installed or tested that countertop. Draw every planned opening using the exact equipment template and its installation requirements. Keep the cutout dimensions with the selected equipment record. An outline that fits against the wall can still conflict with a fixture, a door or the storage below. Show those relationships in the same layout before making a cut list. The exposed edges need their own entries in the plan. Include outside edges and the inside edges of openings, with the treatment specified for the chosen material. Document the proposed support and attachment arrangement alongside the relevant product requirements. Keep the fasteners and equipment connections reachable in the finished layout. Before cutting the material, test a full-size outline in the van. Check the aisle, nearby doors, seating and the reach into storage underneath. Record what you actually observed in the mockup. Keep that separate from assumptions about the final assembly, including its finished thickness and the space its supporting parts will occupy. Keep one decision record with the selected material, its product information, the final dimensions, edge details, support arrangement and finished weight. Include the associated parts in that weight record. My countertop guide connects those choices to the layout mockup and the surrounding wall finish. Thanks for watching. I'm Steve Smith with Camper Van Freedom. Start with the outline, resolve the details and then build the cut list. See you next time.