Hey, I'm Steve Smith with Camper Van Freedom. My water-system notes describe a modular compartment idea, with framing, a pan below the components and transparent access doors. The useful starting point is the space available in the van. Draw that compartment before assuming how much room the surrounding furniture will leave. Keep the concept and the selected component details together as the layout develops. Start the component record with each actual tank, pump, filter, fitting and other selected part. Use its real identifier and keep the relevant instructions with the project. Leave an undecided component as an open choice. That gives the drawing a clear connection to the parts being considered without turning an early sketch into a completed installation record. Next separate visibility from access. With the proposed door open, which connections could you inspect directly? Which would remain behind a tank or another component? Transparent doors were part of my original concept, but seeing through a door does not show every hidden connection. Mark the visible and hidden areas on the layout. Service space is more than the outline of an installed part. Draw the space needed to reach it and the path needed to remove it. Check those paths against adjacent framing, doors and furniture. Keep each component's maintenance and installation information with its record so the access plan follows the actual part. The proposed pan belongs on the same drawing. Show its boundaries, its intended purpose and the construction details that still need to be resolved. My original notes considered framing and aluminum sheet for that idea. Draw the proposed door openings and any inspection lighting separately, then check how they affect the room available for access. Keep the unresolved decisions visible as the plan changes. Record the compartment measurements, selected components, inspection views, removal paths and the current drawing version. My water-system guide links the concept to the layout measurement worksheet and the build decision log. Thanks for watching. I'm Steve Smith with Camper Van Freedom. Draw the space, identify the parts and leave room to inspect and service them. See you next time.