Hi, I'm Steve Smith with Camper Van Freedom. A cabinet panel can work with an aluminum extrusion frame in several ways. The useful starting point is the exact profile and panel, followed by the access and assembly method your cabinet needs. Begin with the job of the panel. Identify its opening, the space behind it and whether you will need to remove it to reach equipment. Panel choices include wood-based sheet, acrylic, polycarbonate, aluminum composite and thin metal. Each material has its own thickness, edge and fastening requirements. Choose the actual material and its intended role before setting the final opening. Next read the profile drawing. Record the slot opening and depth and compare them with the panel and any specified gasket or mounting hardware. Different extrusion series use different dimensions. A panel that appears to fit one slot cannot automatically be assumed to fit another profile. Check the selected manufacturer's details for the exact parts. One approach is to place a panel in the slot during frame assembly. Depending on the profile and cabinet design, that can mean sliding the panel in from the end before the frame is closed. Think through the assembly order: if a panel must be removed later, identify the member or connection that would need to come apart. Another approach uses suitable brackets or other panel-mounting hardware on the outside of the frame. This can make a panel separately removable when the selected parts and available clearance permit it. Compare the mounting details, fastener access and finished panel position with the slot-mounted option. Keep each hardware choice tied to the specific profile drawing. Measure the complete opening and determine how the panel edges will sit in the chosen mounting method. Allow for the actual hardware, the material's edge treatment and the manufacturer's fit requirements. Make a small test piece when the dimensions or assembly sequence need checking. Record the final measured size and the exact panel material before cutting the full piece. Now check the rest of the cabinet. Doors, drawers, adjacent furniture and equipment access all affect the panel layout. A removable service panel needs room for its fasteners and a clear path out. Keep the selected parts, assembly sequence and any unresolved measurements in the project notes. I'm Steve Smith with Camper Van Freedom. Compare the panel, profile and hardware as one assembly, then choose the attachment that supports the access you need. The full panel reference and related aluminum framing guide are linked below. Until next time.