Hey, I'm Steve Smith with Camper Van Freedom. When planning aluminum extrusion or L-track on the van floor, I start with the whole assembly. The frame, the floor layers and the proposed attachment belong in one drawing. My reference page collects ideas for that planning process. This video walks through the record I would build before turning the layout into a parts list. Start in plan view. Draw the furniture footprint, the aisle and the places that need access later. Move an illustrated person through the space and show the doors or drawers opening. Then mark the proposed attachment locations on that same view. This connects the mounting plan to the way the interior will actually be used. Now make a section through one proposed connection. Draw the extrusion or track, the floor finish, the underlying layers and the vehicle structure separately. Give every layer a label. Keep the vehicle drawings alongside that section so a convenient point on the surface isn't confused with an identified attachment location underneath. Record the proposed fastener arrangement as a specific detail. My page mentions threaded inserts and through-fastened arrangements among its references. Those are different connection concepts. Show the parts and the access needed for the selected detail, rather than copying a generic fastener symbol into every location. Keep hardware choices tied to their actual drawings. Include the interface between the metal member and the surrounding floor. Show any proposed separating layer, the exposed edge and the intended treatment around an opening. Animate the assembly coming apart to explain which parts remain accessible. That view also helps organize a future inspection or a change to the furniture layout. Finish with one mounting record: layout revision, vehicle reference, connection detail, hardware identity and access notes. Bring the section back into the full van model and check it against the furniture movement. I'm Steve Smith with Camper Van Freedom. Find the floor-mounting reference on the website, and start with one clearly labeled connection before repeating it across the layout. See you next time.