Hey, I'm Steve Smith with Camper Van Freedom. Insulation around a piece of framing does not describe every heat-transfer path through its connection. My thermal-bridging guide starts with the complete detail: the vehicle body, bracket, fastener, separating material and extrusion. Draw those parts together so the connection can be considered alongside the wall and furniture layout. Follow the conductive path through the metal parts. A screw that continues across a separating layer can provide another heat-transfer path. A pad between two broad surfaces answers only part of that question. Mark which surfaces are separated and which fasteners still connect them. Keep that drawing distinct from a measurement of the finished van's thermal performance. Separate three questions in the record: thermal insulation, corrosion control and mechanical attachment. Each has its own purpose. A material selected to separate surfaces still needs to be considered in the actual joint. Keep the vehicle material, the framing material and the intended attachment arrangement visible instead of treating one product label as an answer to all three questions. Record the proposed separating material's thickness, compression behavior and temperature range alongside the connection information. Those details belong with the actual material being considered. A soft layer can affect how a joint behaves under clamping, so keep the thermal question connected to the mechanical detail rather than comparing insulation in isolation. Keep the mechanical attachment requirements in the plan while considering insulation. Do not remove fasteners or reduce their number just to reduce a conductive path. Record the attachment locations and the loads the arrangement must address. Keep applicable vehicle information and component instructions with that drawing, together with access for later connection inspection. Bring the connection detail into the complete interior layout. Show the intended wall, ceiling and floor layers and the space around doors, fittings and equipment. Keep sealants and foams with their specified application information. Save the current drawing version and the questions still open before buying the parts. My guide links these notes to the framing and mounting records. Thanks for watching. I'm Steve Smith with Camper Van Freedom. Follow the whole connection and keep its thermal, material and attachment questions together. See you next time.