Adhesives & Coatings · My build kit

Dicor White Self-Leveling Lap Sealant

The roof-rack project taught me how much the order of assembly affects access for a sealant nozzle. Dicor is another roof-sealing material in my purchased kit, alongside the mounting hardware and preparation supplies.

By · Camper Van Freedom

Read my build notes ↓

The Item in My Kit

I bought Dicor White Self-Leveling Lap Sealant as part of my camper van equipment.

The roof-rack project taught me how much the order of assembly affects access for a sealant nozzle. Dicor is another roof-sealing material in my purchased kit, alongside the mounting hardware and preparation supplies.

Comparing a Roof-Sealant Bead with a Wide Tape Strip

  1. I exposed and prepared the roof mounting areas before fitting the landing pads.
  2. I applied sealant early and got it on my hands and parts as the rails and crossbars went together.
  3. The installed pads left limited room to reach underneath with the nozzle.
The close working space around one of the rack attachments.
The close working space around one of the rack attachments.
Black sealant around a roof-rack landing pad during my installation.
Black sealant around a roof-rack landing pad during my installation.

My Takeaway from This Job

The rack work made nozzle access a memorable part of the job. Dicor and Kohree retain cartridge-applied beads, while the butyl tape covers an area with a wide strip; the coverage shape changes with the product format.

Product Details And Van-Build Uses

SpecificationProduct Detail
Part Number501LSW
ColorWhite
Tube Size10.3 oz
Application OrientationSelf-leveling for horizontal surfaces

Dicor describes this lap sealant as a secondary seal around roof edges, vents, pipes and screw heads. Its directions cover removing contaminants, allowing the surface to dry and applying with standard caulking equipment. For a camper-van roof project, keeping access around brackets and fasteners in the assembly plan helps leave room for the nozzle. The manufacturer distinguishes self-leveling material from non-sag sealants used where the bead must remain in place on a vertical surface.

Read Dicor 501LSW Product Directions (Online)

Is Self-Leveling Sealant Intended To Hold A Tall Vertical Bead?

The 501LSW product family is labeled for horizontal surfaces. Dicor identifies non-sag products separately for other orientations.

Alternative products

Two Alternatives to Compare

Kohree retains a cartridge-applied RV roof sealant format, while the black butyl repair tape uses a wide adhesive strip; bead placement and strip coverage create different roof-repair layouts.

ProductWhat distinguishes itPurchase link
Dicor White Self-Leveling Lap SealantWhite self-leveling cartridge sealantView on Amazon
Kohree White RV Lap Sealant (alternative)White RV lap-sealant cartridge packageView on Amazon
Black Butyl RV Repair Tape (alternative)Four-inch-wide black butyl repair tapeView on Amazon
Kohree White RV Lap Sealant

Kohree White RV Lap Sealant

This white self-leveling sealant is packaged in cartridges for RV roof work. The multi-cartridge set supplies material for applying beads around roof details.

View on Amazon
Black Butyl RV Repair Tape

Black Butyl RV Repair Tape

This black adhesive repair tape comes as a wide roll with a release liner. The purchased format is four inches wide by 50 feet long.

View on Amazon

Questions from My Build

What Made the Sealant Awkward to Apply?

The nozzle could not reach all the way under the installed landing pad.

What Did the Roof Work Include?

Removing factory covers, preparing the mounting areas, fitting the pads and assembling the rack.

← All adhesives & coatings