Tools & Materials / Vehicle Equipment & Service
The under-seat diesel heater and equipment from working around the van.
I bought this rear bumper guard for my 2023 Ford Transit 250 high-roof extended van and planned a black bedliner finish. My first job was joining the brackets to the guard. The holes did not line up during that attempt, so the session ended with me comparing the instructions and considering a return.
Vanguard VGRBG-1116-0830SS Rear Bumper Guard Project
See The Rear-Guard Purchase Record And Options
The Black Horse Spartan 17FT20MA Grille Guard Project is a separate project.
This project began underneath the front bumper of my Transit. I removed the splash guard, recorded the broken driver-side clip and exposed mounting areas, then showed the support at the front license-plate position. I left the bracket connections loose for alignment before tightening them.
The wheel-and-tire change is part of my 2023 Ford Transit 250 high-roof extended build. I photographed the van in the shop with Method boxes beside it, the removed original assemblies inside the cargo area, and the black Method MR701 wheels and BFGoodrich tires after installation.
These photos connect the equipment category to one actual job on the van. Follow the wheel-and-tire project in the build diary overview alongside the other recorded build stages.
Photos and video by Steven Smith.
Method Race Wheels MR701 Project
Watch the Method introduction and installed walkaround clips · See the before-and-after in my build diary.
No matching items. Try another name or clear the filters.
I fitted BFGoodrich All-Terrain T/A tires alongside the Method wheels on my Transit, and my purchase records identify the KO2 model. The recorded LT255/70R16 load-range E 120/117S specification is also readable in my later rear-wheel photograph.
My build notes & alternatives →View on Amazon
My build footage shows matte-black Method MR701 wheels replacing the Transit’s silver steel wheels. The historical purchase record identifies the sixteen-by-six-and-a-half-inch, six-by-180, positive 90 mm version.
My build notes & alternatives →View on Amazon
This Ironton set includes two molded vehicle-service ramps. Their inclined approach leads to a raised wheel platform.
My original item & alternatives →View on Amazon
This maXpeedingrods 8KW split diesel-heater kit includes a heater body, LCD controller and remote control. Its separate tank, tubing and mounting components provide the parts for arranging an installation.
My experience & alternatives →View on Amazon
The ROADGIVE kit combines dent-pulling tools, glue tabs and shaping accessories in a multi-piece set. It includes several pulling arrangements rather than a single suction handle.
My experience & alternatives →View on Amazon
These portable vehicle service ramps provide raised wheel platforms for underbody access. Their molded ramp form offers another product to compare for garage service work.
My experience & alternatives →View on Amazon
This compressor-fed tire inflator combines a trigger handle, hose and digital pressure display. The attached chuck connects the hose to a tire valve.
My experience & alternatives →View on Amazon
The MAXXAIR 6200K combines a roof vent with an electrically driven fan and a manually opened lid. Its ceiling-mounted keypad provides the fan controls.
My experience & alternatives →View on Amazon
This keyed lock spans the steering wheel with an adjustable metal bar. Its yellow finish makes the additional locking device visible inside the cab.
My experience & alternatives →View on Amazon
This padded workshop creeper folds from a low rolling platform into a seat. Casters let the frame move around a workshop floor in either working arrangement.
My experience & alternatives →View on Amazon
The Sirocco II is a hardwired cabin fan with a pivoting gimbal mount. Its 12V and 24V design places adjustable airflow inside a boat or vehicle cabin.
My experience & alternatives →View on Amazon
This rear step slides into a two-inch hitch receiver. Its wide platform places a foothold behind the vehicle.
My experience & alternatives →View on Amazon
These treaded recovery boards provide a portable surface beneath vehicle tires. Their molded shape combines a tire-contact area with handholds for moving the boards.
My experience & alternatives →View on Amazon
BlueDriver connects a vehicle diagnostic port to its phone app over Bluetooth. It provides a compact interface for reading diagnostic information and trouble codes.
My experience & alternatives →View on Amazon
These reflective covers fit the front side-window shapes of the listed mid- and high-roof Transit applications. They cover the glass while the van is parked.
My experience & alternatives →View on Amazon
This reflective shade covers the front windshield in its listed Ford Transit application. The fitted panel provides a removable screen across the cab's largest glass area.
My experience & alternatives →View on Amazon
This compact ceramic heater provides a five-hundred-watt heating option. Its small desktop-style housing occupies less space than a tower heater.
My experience & alternatives →View on Amazon
This flexible air duct comes as a twenty-five-foot length with a two-inch nominal diameter. Its flexible wall allows an air route to bend between components.
My experience & alternatives →View on Amazon
This portable ceramic heater has selectable heat settings and a thermostat. Its compact housing and carrying handle make it movable between indoor work areas.
My experience & alternatives →View on Amazon
This rear step provides a treaded foothold at the back of its listed Transit application. Its bracketed mounting arrangement attaches the step to the vehicle.
My experience & alternatives →View on Amazon
This kit combines preparation materials with a coating for restoring headlight lenses. Its wipe-based stages provide a compact set of materials for the lens surface.
My experience & alternatives →View on Amazon
This kit combines taps, replacement drain plugs and sealing washers for several metric thread sizes. Its fitted case organizes the parts by the repair size being used.
My experience & alternatives →View on Amazon
This red grease is packaged in cartridges for a grease gun. The twin-cartridge pack provides lubricant for mechanical service tasks.
My experience & alternatives →View on Amazon
This metal carrier holds a jerry can in a framed base. An upper retaining strap closes over the can to keep it within the holder.
My experience & alternatives →View on Amazon
This black steel jerry can has a twenty-litre body and a top carrying handle. A latched cap closes the opening used with its spout system.
My experience & alternatives →View on Amazon
The Rally Armor MF12-BAS-RD set uses black mud flaps with red branding. These are universal-style flaps supplied without vehicle-specific mounting hardware.
My experience & alternatives →View on Amazon
This LHCDQSKCW set contains upper and lower replacement mirror glass for the right side of a Ford Transit. The pieces come with backing plates and heating connections.
My experience & alternatives →View on Amazon
This replacement glass covers the lower left section of a Ford Transit mirror. It includes a backing plate and heating connections.
My experience & alternatives →View on Amazon
This LHCDQSKCW replacement is the lower left mirror-glass section for a Ford Transit. It is supplied on a backing plate.
My experience & alternatives →View on Amazon
The Air Lift 25980EZ combines a WirelessOne compressor system with an EZ Mount assembly. It controls air-spring pressure through a handheld remote or mobile app.
My experience & alternatives →View on Amazon
The Air Lift 57213 is a rear air-spring kit for selected Ford Transit configurations. It includes the springs and the mounting components for the installation.
My experience & alternatives →View on Amazon
This Bastion tongue jack uses a twelve-volt motor to raise and lower an A-frame trailer coupling. It includes a front light and a manual crank arrangement.
My experience & alternatives →View on Amazon
This LHCDQSKCW replacement covers the lower right section of a Ford Transit mirror. The glass is supplied with a backing plate.
My experience & alternatives →View on Amazon
These PARTZER front floor liners are shaped for the listed 2022–2025 Ford Transit vinyl-floor models. Their molded TPE form follows the front footwell area.
My experience & alternatives →View on Amazon
The Dorman 090-175CD is a pilot-point oil drain plug with an M12-by-1.75 thread. Its hex head provides the tool contact for removal and installation.
My experience & alternatives →View on Amazon
The Spartan guard uses black metal uprights and crossbars across the front of the van. This modular model is listed for the later full-size Transit front-end design.
My experience & alternatives →View on Amazon
The FTP004 is a passenger-side seat swivel base with a rotating plate assembly. Its release mechanism allows the seat platform to turn from its locked position.
My experience & alternatives →View on Amazon
These black running boards add step surfaces along the sides of a full-size Transit. The steel assemblies mount beneath the door openings.
My experience & alternatives →View on Amazon
The CURT 14012 is a frame-mounted trailer hitch with a two-inch receiver opening. Its side mounting plates connect the receiver crossmember to the vehicle.
My experience & alternatives →View on Amazon
This side ladder mounts along the side of a high-roof Transit van. Its fixed steps provide access to the roof rack.
My experience & alternatives →View at Flatline Van Co
This hydraulic floor jack combines a low-profile steel chassis with a dual-piston pump. Its round saddle has a rubber pad at the lifting contact.
My experience & alternatives →View on Amazon
This low-profile rack uses side rails and adjustable crossbars above the extended Transit roof. The open layout provides space to arrange roof-mounted equipment.
My experience & alternatives →View at Flatline Van Co
This offer contains two five-quart containers of Valvoline Advanced full-synthetic motor oil. Both containers use the SAE 5W-30 viscosity grade.
My experience & alternatives →View on Amazon
This kit uses resin and an applicator assembly for windshield-chip repair. It brings the small repair components together in one package.
My experience & alternatives →View on Amazon
This pack contains two black silicone license plate frames. The flexible frames surround the edges of the plates.
My experience & alternatives →View on Amazon
This three-inch-wide tow strap measures twenty feet long. Reinforced loops at each end provide its attachment points.
My experience & alternatives →View on Amazon
This kit combines a dashboard display with four tire sensors. The monitor displays pressure and temperature information from the sensor positions.
My experience & alternatives →View on Amazon
This black dog tracker attaches to a collar and connects with the Tractive service. Its subscription-based app provides location tracking and virtual-fence features.
My experience & alternatives →View on Amazon
This Master Lock assembly combines a puck-style lock with a steel hasp. Its wide mounting body provides a different footprint for a door-locking point.
My experience & alternatives →View on Amazon
This 12V air-conditioning system separates the condenser and compressor from a ducted indoor evaporator. The arrangement distributes cooling equipment between the space beneath the van and the interior duct route.
My experience & alternatives →View at UndermountAC
The ECOGARD XC11577 is a replacement cabin air filter listed for Ford Transit vans. Its pleated panel fits into the cabin ventilation filter housing.
My experience & alternatives →View on Amazon
The Vanguard VGRBG-1116-0830SS is a stainless-steel pintle-style rear bumper guard listed for the Ford Transit. Its single-tube design incorporates a central step pad.
My experience & alternatives →View on Amazon