Tools & Materials / Cutting & Abrasives
Saw blades, drill bits, sanding sheets and rolls for shaping and finishing project materials.
No matching items. Try another name or clear the filters.
These reciprocating-saw blades support cutting and removal work during a camper-van conversion. The set provides different blade patterns for changing between cutting tasks.
My experience & alternatives →View on Amazon
These wire-brush attachments clean surfaces using a drill. Their bristles remove loose residue from metal parts during preparation work.
My experience & alternatives →View on Amazon
This drill-bit set contains titanium-coated bits in several sizes. The assortment provides cutting tools for making holes during fabrication work.
My experience & alternatives →View on Amazon
These DEWALT cutoff discs are intended for cutting metal with a compatible angle grinder. They can help trim suitable brackets and metal stock during a camper-van build.
My experience & alternatives →View on Amazon
This coarse abrasive roll uses a hook-and-loop backing for attachment to sanding tools. It can be divided into smaller lengths for surface-preparation work.
My experience & alternatives →View on Amazon
This circular saw blade has carbide-tipped teeth arranged around a twelve-inch disc. Its metal-cutting format is intended for aluminum and other nonferrous stock.
My experience & alternatives →View on Amazon
This woodworking set contains countersink bits, plug cutters and drill stops. The different cutter shapes provide options for preparing and finishing holes in wood.
My experience & alternatives →View on Amazon
These fine-grit abrasive sheets have a waterproof paper backing. The sheet format can be cut or folded for hand sanding and sanding blocks.
My experience & alternatives →View on Amazon
This jigsaw-blade assortment contains several tooth patterns in a storage case. Its T-shank blades provide options for cutting different material types with a jigsaw.
My experience & alternatives →View on Amazon
This DEWALT assortment stores T-shank jigsaw blades in a case. Its mixed blade shapes and tooth patterns cover different cutting tasks.
My experience & alternatives →View on Amazon
This abrasive roll has hook-and-loop backing and a longboard-width strip. It can be cut into lengths for a matching sanding block or board.
My experience & alternatives →View on Amazon
These T-shank jigsaw blades have a tooth pattern intended for thick-metal cutting. The pack groups repeated blades of the same type rather than a mixed-material assortment.
My experience & alternatives →View on Amazon
This LEILUO assortment combines oscillating-tool blades and sanding accessories. The different attachment shapes cover cutting and surface-finishing tasks.
My experience & alternatives →View on Amazon
This DEWALT pair contains ten-inch circular saw blades with different tooth counts. The two blades provide separate tooth patterns within one diameter.
My experience & alternatives →View on Amazon
This KATA kit groups circular hole saws with mandrels and pilot bits. The different diameters provide a selection of round-opening sizes.
My experience & alternatives →View on Amazon
This Fiskars rotary cutter uses a circular blade with a loop-style handle. The rolling cutting edge follows a line across fabric and other suitable sheet materials.
My experience & alternatives →View on Amazon
This KOWOOD set brings several cutting profiles together in a storage case. The bits use quarter-inch shanks for routing grooves and shaping wooden edges.
My experience & alternatives →View on Amazon
These HEADLEY TOOLS replacements are circular 60mm rotary-cutter blades. The pack provides spare cutting edges for a corresponding rotary cutter.
My experience & alternatives →View on Amazon
This Idemeet mat provides a gridded surface for rotary cutting. Measurement markings help lay out straight lines and repeated pieces.
My experience & alternatives →View on Amazon
This Milwaukee set contains twenty-three titanium-coated drill bits in a case. The assortment provides several hole sizes in one organized kit.
My experience & alternatives →View on Amazon
This 3M sanding sponge combines an eighty-grit abrasive surface with a foam block. Its block shape provides a hand-held abrasive for edges and surfaces.
My experience & alternatives →View on Amazon
These five-inch Diablo discs have a 120-grit abrasive face and hook-and-loop backing. The Amazon option is a fifty-disc pack.
My experience & alternatives →View on Amazon
These coarse sanding discs use a hook-and-loop attachment surface. Their circular format provides another approach to surface preparation with a disc sander.
My experience & alternatives →View on Amazon
These 400-grit sheets provide a fine abrasive for wet or dry sanding. The pack contains twenty-five sheets in a five-and-a-half-by-nine-inch format.
My experience & alternatives →View on Amazon
This four-inch abrasive disc mounts in a drill. Its open abrasive structure strips surface coatings and rust.
My experience & alternatives →View on Amazon
These sanding sponges combine an eighty-grit abrasive with a foam block. The pack provides multiple ready-coated blocks for hand sanding.
My experience & alternatives →View on Amazon
This hole-saw kit provides several cutting diameters in a carrying case. It makes circular openings for fittings, cable routes and other fabrication work.
My experience & alternatives →View on Amazon
These five-inch sanding discs use an open net backing. Their hook-and-loop attachment connects the abrasive to the sander pad.
My experience & alternatives →View on AmazonThis abrasive roll has hook-and-loop backing and a longboard-width strip. It can be cut into lengths for a matching sanding block or board.
My experience & alternatives →View on AmazonThese 400-grit sheets provide a fine abrasive for wet or dry sanding. The pack contains twenty-five sheets in a five-and-a-half-by-nine-inch format.
My experience & alternatives →View on Amazon
This six-and-one-half-inch circular-saw blade has twenty-four teeth. Its carbide cutting tips are arranged for cutting wood.
My experience & alternatives →View on Amazon
This five-piece countersink set uses M2 high-speed-steel cutters. The quarter-inch tri-flat shanks are designed to grip in a drill chuck.
My experience & alternatives →View on Amazon
This scoring tool has a curved yellow handle and replaceable cutting blades. The pack combines one handle with eleven blades for plastic-sheet scoring.
My experience & alternatives →View on Amazon
These five-inch mesh discs provide a 400-grit abrasive surface. Their hook-and-loop backing attaches to a corresponding sanding pad.
My experience & alternatives →View on Amazon
This box contains fifty five-inch sanding discs at 320 grit. The discs use a hook-and-loop backing and an eight-hole pattern.
My experience & alternatives →View on Amazon