
Half-Inch PEX Pipe Support Clips
These U-shaped plastic clips hold half-inch PEX tubing along a surface. Their open shape allows tubing to be positioned before the clip is fastened.
My experience & alternatives →View on AmazonTools & Materials / Plumbing & Water
Water-supply hoses, tank connections, PEX fittings, valves and pipe materials from my van purchases.
No matching items. Try another name or clear the filters.

These U-shaped plastic clips hold half-inch PEX tubing along a surface. Their open shape allows tubing to be positioned before the clip is fastened.
My experience & alternatives →View on Amazon
This white Schedule 40 PVC pipe is supplied as a two-foot section. Its one-and-a-half-inch nominal size provides rigid pipe stock for a matching layout.
My experience & alternatives →View on Amazon
These PVC adapters join a socket connection to a half-inch male NPT thread. Their hex-shaped center provides a defined transition between the two ends.
My experience & alternatives →View on Amazon
This white PTFE tape wraps around compatible pipe threads during assembly. The half-inch-wide rolls provide a thin sealing material in a compact form.
My experience & alternatives →View on Amazon
This brass regulator fits into an RV water-supply connection. Its compact inline body provides pressure regulation without a separate gauge assembly.
My experience & alternatives →View on Amazon
This Camco hose provides a flexible water-supply connection for RV use. The twenty-five-foot length reaches between a supply point and the vehicle connection.
My experience & alternatives →View on Amazon
These brass ball valves have half-inch PEX barbs and lever handles. A quarter-turn handle changes the valve between its open and closed positions.
My experience & alternatives →View on Amazon
This flexible tank adapter seals around a matching pipe through a prepared tank opening. Its one-and-a-half-inch nominal pipe size identifies the larger adapter in this comparison.
My experience & alternatives →View on Amazon
These flexible adapters seal around matching half-inch pipe through a tank wall. The pack supplies several adapters for repeated tank connections.
My experience & alternatives →View on Amazon
These brass adapters connect half-inch PEX tubing to three-quarter-inch female NPT threads. The barbed end and threaded end provide two different connection styles in one fitting.
My experience & alternatives →View on Amazon
This brass swivel adapter joins half-inch PEX tubing to a three-quarter-inch female garden-hose thread. The rotating hose nut allows the threaded end to turn separately from the barbed body.
My experience & alternatives →View on Amazon
These brass adapters connect half-inch PEX tubing to half-inch male NPT threads. Their barbed tube end is used with the PEX crimp connection method.
My experience & alternatives →View on Amazon
This gray PVC elbow turns a hose connection through ninety degrees. Both ends use one-and-a-half-inch barbs for matching hose.
My experience & alternatives →View on Amazon
These brass elbows turn a half-inch PEX tube route through ninety degrees. Barbs at both ends provide the connection points for crimped tubing.
My experience & alternatives →View on Amazon
This spin-down filter has a clear housing and a reusable mesh element. A valve at the bottom provides a flushing outlet for collected sediment.
My experience & alternatives →View on Amazon
This flexible silicone tube has a one-and-a-half-inch inside diameter. The translucent wall makes the tubing route visible along its length.
My experience & alternatives →View on Amazon
This stainless-steel ball valve has one male and one female threaded connection. A lever handle opens and closes the internal flow path.
My experience & alternatives →View on Amazon
This external filter assembly holds two cartridges in separate housings. A shared bracket keeps the housings together beside the hose connections.
My experience & alternatives →View on Amazon
This black inlet provides an exterior hose connection for an RV water system. Its flange surrounds the connection and the assembly includes a check valve.
My experience & alternatives →View on Amazon
This stainless-steel three-way valve has half-inch female NPT connections. Its T-port arrangement provides several flow-routing positions through one valve body.
My experience & alternatives →View on Amazon
This small faucet provides a separate outlet beside a kitchen sink. Its brushed-nickel finish and single control distinguish it from a pull-down kitchen mixer.
My experience & alternatives →View on Amazon
This square shower drain has a removable black grate and a surrounding flange. The assembly includes a strainer beneath the grate for collecting loose debris.
My experience & alternatives →View on Amazon
This black kitchen faucet has a pull-down spray head and a single control lever. Its curved spout places the outlet above the sink while the hose extends the head's reach.
My experience & alternatives →View on Amazon
This black shower set combines a square rain head with a wall control. The separate head and valve trim define the visible parts of the shower layout.
My experience & alternatives →View on Amazon
This compact electric water heater stores water in a four-gallon tank. Its small cabinet has water connections on top and a temperature control on the front.
My experience & alternatives →View on Amazon
This compact accumulator has an internal bladder and a water connection. It adds a small pressurized volume beside a pump in a water-system layout.
My experience & alternatives →View on Amazon
This twist-on strainer has half-inch pipe connections and a clear inspection bowl. The removable bowl gives access to its internal screen.
My experience & alternatives →View on Amazon
This camper sink-drain assembly combines a compact fitting with a flexible hose. Its small hose route differs from a conventional rigid under-sink trap.
My experience & alternatives →View on Amazon
This tank-filling attachment combines a short flexible tube with a shutoff valve. It places flow control near the end of the filling hose.
My experience & alternatives →View on Amazon
This round black hatch provides a capped gravity-fill opening. A surrounding flange forms the mounting face against the exterior panel.
My experience & alternatives →View on Amazon
This rectangular five-gallon container has an integrated handle and a screw cap. Its flat sides provide a different storage shape from a round bucket.
My experience & alternatives →View on Amazon
These brass adapters join half-inch PEX barbs to three-quarter-inch female garden-hose threads. The two-pack supplies the same swivel connection for two locations.
My experience & alternatives →View on Amazon
This twelve-volt diaphragm pump has an electric motor and a pressure-controlled pump head. Its mounting feet and hose connections define the space needed around the assembly.
My experience & alternatives →View on Amazon
This portable toilet separates into an upper seat-and-flush section and a lower holding tank. A hand-operated pump and emptying spout are built into the assembly.
My experience & alternatives →View on Amazon
This personal filter has a narrow body with covered openings at both ends. Its straw-style format packs as a separate handheld accessory.
My experience & alternatives →View on Amazon
This kit combines red and blue PEX-B tubing with fittings and assembly tools. The two tubing colors help separate planned runs within a plumbing layout.
My experience & alternatives →View on Amazon
This polymer fitting joins half-inch PEX tubing to a male pipe-thread connection. A barbed end enters the tubing while the opposite end threads into the adjoining fitting.
My experience & alternatives →View on Amazon
This corrugated drain pipe expands into a long flexible run. Its solid wall routes water along the pipe rather than through side perforations.
My experience & alternatives →View on Amazon
This repair kit supplies replacement male and female hose ends with clamps. The fittings attach to cut hose ends to rebuild the threaded connections.
My experience & alternatives →View on Amazon
These PVC valves use socket ends and a lever-operated ball. Their broad handles provide a visible indication of the valve position.
My experience & alternatives →View on Amazon
This PVC adapter joins a one-and-a-half-inch hose barb to a male NPT thread. Its straight body provides a transition between hose and a threaded fitting.
My experience & alternatives →View on Amazon
This PVC adapter joins a one-and-a-half-inch hose barb to a spigot end. The straight fitting connects a hose route to a matching PVC socket arrangement.
My experience & alternatives →View on Amazon
This brass connector set adds detachable couplings to garden-hose threads. The male and female halves separate without repeatedly unscrewing the hose ends.
My experience & alternatives →View on Amazon
This eighteen-foot propane adapter hose connects a QCC1 tank fitting to an appliance connection intended for a one-pound cylinder. It combines the two connector types in one flexible hose.
My experience & alternatives →View on Amazon
The CAMPLUX AY132 is a portable propane water heater intended for outdoor use. It has a folding handle and separate water and gas connections.
My experience & alternatives →View on Amazon
The VerterPure VP6 is an inline UV-C LED water-treatment unit powered by twelve-volt DC. It uses automatic on-and-off control as water flows through the unit.
My experience & alternatives →View on Amazon
This JUWO check valve has half-inch push-to-connect ends. Its inline body provides a one-way flow path between the two pipe connections.
My experience & alternatives →View on Amazon
This twelve-foot propane extension hose comes with a selection of conversion fittings. Its braided exterior and separate adapters provide a different format from a fixed tank-to-appliance hose.
My experience & alternatives →View on Amazon
This DOZYANT adapter changes a POL tank connection to a QCC1 connection. It is a compact brass fitting supplied with a hand wheel and wrench.
My experience & alternatives →View on Amazon
This twenty-four-foot braided propane extension hose includes several conversion fittings. It provides a longer hose run than the twelve-foot version in the same purchase family.
My experience & alternatives →View on Amazon
These stainless-steel cinch clamps are sized for half-inch PEX connections. Each clamp uses a single ear that is closed with a cinch tool.
My experience & alternatives →View on Amazon
The Flame King YSN100MLT-1 is a hundred-pound steel propane cylinder with a multi-valve arrangement. Its valve layout separates filling and service connections.
My experience & alternatives →View on Amazon
This Aupoko kit brings together QCC1 and POL connection adapters with threaded couplers. The brass pieces allow several connector transitions within one assortment.
My experience & alternatives →View on Amazon
This GLAHODEN wall-mounted reel contains a hundred-foot garden hose with automatic retraction. It uses a swivel bracket and comes with a spray nozzle.
My experience & alternatives →View on Amazon