Electrical & Wiring · Build notes & Amazon options

Blank Wall Plates for Interior Finishing

Blank wall plates are among the small electrical-finishing purchases for the project.

By · Camper Van Freedom

Read my build notes ↓

My Purchase and Amazon Option

Blank wall plates are among the small electrical-finishing purchases for the project.

The featured Amazon option is ENERLITES White Blank Wall Plates.

Closing Unused Openings in the Interior Finish

  1. I used SketchUp to plan the interior and put body openings ahead of the framing, floor and wall panels.
  2. My Interior Preparation notes included the shower drain and openings for three water tanks in that preparation sequence.
  3. I removed cargo tie-down hardware for later framing mounts and door trim for the later insulation and paneling.
The cargo floor during my preparation session before sound deadening.
The cargo floor during my preparation session before sound deadening.
Removing stuck-on residue during the floor cleanup.
Removing stuck-on residue during the floor cleanup.
Blank Wall Plates for Interior Finishing

My Takeaway for the Build

I planned the interior before the framing and panels were installed. The blank-plate purchase concerns the final face around an unused box opening. The ENERLITES pack, Leviton nylon two-pack and single thermoset plate change quantity and material while keeping a solid face, making those details useful for the parts list.

Product Details And Van-Build Uses

SpecificationProduct Detail
Current OptionENERLITES one-gang blank plate
Model Family8801
FormatPlain face with mounting screws

A wall plate is a finishing piece around a box opening, so its outside dimensions need to be considered alongside the cut in the panel. The ENERLITES 8801 family provides the blank face shown as the current option here. For a van interior, compare the plate outline with the finished wall surface and leave its screws accessible. A sample layout helps show how the plate sits near a cabinet edge or trim strip. The original purchased cover remains a separate item.

Manufacturer Product Reference

Download ENERLITES 8801 Cut Sheet (PDF)

Related Build-Kit Reference: Blank Electrical Covers in My Wiring Supplies

What Is Useful About A Blank Face?

It finishes an unused single-gang opening without an outlet cutout. The plate remains removable at its mounting screws.

Alternative products

Two Alternatives to Compare

ENERLITES supplies a ten-pack of blank plates. The Leviton alternatives offer a two-pack in thermoplastic nylon and a single thermoset plate.

ProductWhat distinguishes itPurchase link
ENERLITES White Blank Wall PlatesTen white single-gang blank plates.View on Amazon
Leviton 80714-W Blank Plates (alternative)Two thermoplastic-nylon blank plates.View on Amazon
Leviton 88014 Blank Wall Plate (alternative)Single thermoset blank plate.View on Amazon
Leviton 80714-W Blank Plates

Leviton 80714-W Blank Plates

These white single-gang plates cover unused wall-box openings. The two-pack uses solid thermoplastic-nylon faces without device cutouts.

View on Amazon
Leviton 88014 Blank Wall Plate

Leviton 88014 Blank Wall Plate

This white single-gang plate covers an unused wall-box opening. Its solid thermoset face has no device cutout.

View on Amazon

← All electrical & wiring