Camper Van
Freedom.

Electrical & Wiring · My build kit

BOJACK 150A MEGA Fuses

The 150-amp BOJACK pack is another separate line in my electrical purchases. Its dedicated item page keeps the rating visible among the similar-looking bolt-on fuses.

By Steven Smith · Camper Van Freedom

Read my build notes ↓
The larger roof enclosure during my cable-entry work.
The larger roof enclosure during my cable-entry work.

The item in my kit

I bought BOJACK 150A MEGA Fuses as part of my camper van equipment.

The 150-amp BOJACK pack is another separate line in my electrical purchases. Its dedicated item page keeps the rating visible among the similar-looking bolt-on fuses.

Where it fits my build

I brought the roof light wires and camera cables into a PVC conduit layout. That work included drilled enclosures, threaded fittings, cable glands, solder-seal splices and grouped wiring.

During the small-box stage, I drilled for a male PVC fitting and used a fitting inside as a retaining nut. I routed the camera cable through a gland into a tee and brought the light-wire groups toward the van entry.

A grouped roof-wire connection before the final conduit work.
A grouped roof-wire connection before the final conduit work.

My build notes

The wiring project was a sequence of individual connections and routes. The photographs show the intermediate stages, including open boxes and wrapped wire groups, before the remaining covers and conduit joints were finished.

I built the cable route a section at a time, bringing local connections into the larger conduit system.

Alternative products

Two alternatives to compare

VEXUNGA and Joinfworld offer other 150-amp MEGA products, with two-fuse and three-fuse package formats respectively.

VEXUNGA 150A MEGA Fuses

VEXUNGA 150A MEGA Fuses

These 150-amp MEGA fuses have mounting holes at both ends. The central bodies carry their rating identification.

View on Amazon
Joinfworld 150A MEGA Fuse Pack

Joinfworld 150A MEGA Fuse Pack

This pack contains three 150-amp MEGA fuses. Each strip has a mounting hole at both ends for bolt-down connections.

View on Amazon

Questions from my build

What connected the roof equipment to the van entry?

A PVC conduit layout with boxes, fittings and cable glands.

What did I do at the small junction box?

I drilled the box for a threaded PVC fitting and arranged the light-wire connections inside that part of the route.

← All electrical & wiring