This is the 60-amp BOJACK entry in my purchased fuse collection. Recording it separately keeps the similarly shaped MEGA products distinguishable in the hub.
The larger roof enclosure during my cable-entry work.
The item in my kit
I bought BOJACK 60A MEGA Fuses as part of my camper van equipment.
This is the 60-amp BOJACK entry in my purchased fuse collection. Recording it separately keeps the similarly shaped MEGA products distinguishable in the hub.
Where it fits my build
I brought the roof light wires and camera cables into a PVC conduit layout. That work included drilled enclosures, threaded fittings, cable glands, solder-seal splices and grouped wiring.
During the small-box stage, I drilled for a male PVC fitting and used a fitting inside as a retaining nut. I routed the camera cable through a gland into a tee and brought the light-wire groups toward the van entry.
A grouped roof-wire connection before the final conduit work.
My build notes
The wiring project was a sequence of individual connections and routes. The photographs show the intermediate stages, including open boxes and wrapped wire groups, before the remaining covers and conduit joints were finished.
I built the cable route a section at a time, bringing local connections into the larger conduit system.
Alternative products
Two alternatives to compare
GLOSO and VEXUNGA offer other 60-amp MEGA fuse packs, with three-fuse and two-fuse package formats respectively.
GLOSO 60A MEGA Fuse Pack
This pack contains 60-amp MEGA fuses with bolt-down mounting tabs. The fuses are grouped as a three-piece set.
