This sensor is one of the electronics purchases associated with the water-system side of the project. Tank layout and access to wiring were both part of the early planning before closing the interior surfaces.
I bought CQRobot Non-Contact Liquid Level Sensor as part of my camper van equipment.
This sensor is one of the electronics purchases associated with the water-system side of the project. Tank layout and access to wiring were both part of the early planning before closing the interior surfaces.
Sensor Shape Around the Planned Tanks
I used SketchUp to plan the interior and put body openings ahead of the framing, floor and wall panels.
My Interior Preparation notes included the shower drain and openings for three water tanks in that preparation sequence.
I removed cargo tie-down hardware for later framing mounts and door trim for the later insulation and paneling.
The cargo floor during my preparation session before sound deadening.Removing stuck-on residue during the floor cleanup.
My Takeaway for the Build
My Interior Preparation notes include openings for three water tanks before the floor and panels. This CQRobot purchase adds an external sensor position to consider around a container. The flat probe changes the mounting shape, while EC Buying offers another wired external probe, making attachment space and the controller connection concrete comparison points.
Product Details And Van-Build Uses
Specification
Product Detail
Guide Identity
CQRSENYW001; ASIN B07ZMHJ6NN
Output
Digital liquid-present signal
Interface
Three-wire connection with configurable signal level
This sensor detects the presence of liquid at its probe location and provides a digital signal. That is different from a direct readout of the total contents of a tank. The CQRobot guide identifies the switch settings and provides connection examples for Arduino and Raspberry Pi. For a van water-system project, keep the probe position, container wall and controller input in the same notes. A labeled probe position and controller record make later testing and tank-layout changes easier to follow.
The guide describes detecting liquid at the probe position. A tank-volume display would be a separate system built around the sensor readings.
Alternative products
Two Alternatives to Compare
The flat CQRobot probe changes the mounting shape. The EC Buying XKC-Y25-V offers another external sensing format, with the output connection and probe placement as the main comparison points.
Product
What distinguishes it
Purchase link
CQRobot Non-Contact Liquid Level Sensor
Round external liquid-level probe with signal wiring.