I bought this FXC rocker among the van's control hardware. Its momentary action distinguishes it from the simple on/off round switches elsewhere in my purchase list.
The larger roof enclosure during my cable-entry work.
The item in my kit
I bought FXC Seven-Pin Momentary Rocker Switch as part of my camper van equipment.
I bought this FXC rocker among the van's control hardware. Its momentary action distinguishes it from the simple on/off round switches elsewhere in my purchase list.
Where it fits my build
I brought the roof light wires and camera cables into a PVC conduit layout. That work included drilled enclosures, threaded fittings, cable glands, solder-seal splices and grouped wiring.
During the small-box stage, I drilled for a male PVC fitting and used a fitting inside as a retaining nut. I routed the camera cable through a gland into a tee and brought the light-wire groups toward the van entry.
A grouped roof-wire connection before the final conduit work.
My build notes
The wiring project was a sequence of individual connections and routes. The photographs show the intermediate stages, including open boxes and wrapped wire groups, before the remaining covers and conduit joints were finished.
I built the cable route a section at a time, bringing local connections into the larger conduit system.
Alternative products
Two alternatives to compare
Nilight's blue momentary rocker has a plain face, while the Down-Up variant adds directional lettering; both provide alternative seven-pin momentary control formats.
Nilight Blue Momentary Rocker Switch
This seven-pin rocker returns to its center-off position after either directional press. Its illuminated face and jumper wires provide a compact control package.
This seven-pin rocker has a center-off position and momentary movement in either direction. Down and Up markings identify the two control directions on its face.
