I bought bulk cord as well as finished extension leads for the camper equipment. This GearIT purchase records the jacketed three-conductor cable separately from the plug ends and shore-power inlet.
The larger roof enclosure during my cable-entry work.
The item in my kit
I bought GearIT 10/3 SOOW Bulk Cable as part of my camper van equipment.
I bought bulk cord as well as finished extension leads for the camper equipment. This GearIT purchase records the jacketed three-conductor cable separately from the plug ends and shore-power inlet.
Where it fits my build
I brought the roof light wires and camera cables into a PVC conduit layout. That work included drilled enclosures, threaded fittings, cable glands, solder-seal splices and grouped wiring.
During the small-box stage, I drilled for a male PVC fitting and used a fitting inside as a retaining nut. I routed the camera cable through a gland into a tee and brought the light-wire groups toward the van entry.
A grouped roof-wire connection before the final conduit work.
My build notes
The wiring project was a sequence of individual connections and routes. The photographs show the intermediate stages, including open boxes and wrapped wire groups, before the remaining covers and conduit joints were finished.
I built the cable route a section at a time, bringing local connections into the larger conduit system.
Alternative products
Two alternatives to compare
The CLLOMAGY listing and the second SOOW bulk-cable listing provide other 10/3 cable options; supplied length distinguishes the packages.
CLLOMAGY 10/3 SOOW Bulk Cable
This bulk cable encloses three 10-AWG conductors within a SOOW jacket. It is supplied as a twenty-five-foot length without fitted cord ends.
