I bought these yellow crimp splices among the wiring consumables for the van. My roof diary separately records solder-seal joining work, giving the project a mix of different connection supplies.
The larger roof enclosure during my cable-entry work.
The item in my kit
I bought Haisstronica Yellow Heat-Shrink Butt Connectors as part of my camper van equipment.
I bought these yellow crimp splices among the wiring consumables for the van. My roof diary separately records solder-seal joining work, giving the project a mix of different connection supplies.
Where it fits my build
I brought the roof light wires and camera cables into a PVC conduit layout. That work included drilled enclosures, threaded fittings, cable glands, solder-seal splices and grouped wiring.
During the small-box stage, I drilled for a male PVC fitting and used a fitting inside as a retaining nut. I routed the camera cable through a gland into a tee and brought the light-wire groups toward the van entry.
A grouped roof-wire connection before the final conduit work.
My build notes
The wiring project was a sequence of individual connections and routes. The photographs show the intermediate stages, including open boxes and wrapped wire groups, before the remaining covers and conduit joints were finished.
I built the cable route a section at a time, bringing local connections into the larger conduit system.
Alternative products
Two alternatives to compare
Ancor offers another single-size heat-shrink butt-connector pack, while the Wirefy kit groups several connector sizes in one assortment.
Ancor Yellow Heat-Shrink Butt Connectors
These yellow butt connectors crimp onto 12-to-10-AWG wire at either end. Heat-shrink sleeves surround the metal connection barrels.
