Electrical & Wiring · My build kit

Hopkins 47185 Multi-Tow Trailer Adapter

This adapter is part of my towing-equipment purchases. Its two outlet formats are the useful organizing detail when separating trailer connectors from the other cable and plug hardware in my van catalog.

By · Camper Van Freedom

Read my build notes ↓

The Item in My Kit

I bought Hopkins 47185 Multi-Tow Trailer Adapter as part of my camper van equipment.

This adapter is part of my towing-equipment purchases. Its two outlet formats are the useful organizing detail when separating trailer connectors from the other cable and plug hardware in my van catalog.

Grouping Trailer Outlets in One Housing

  1. I pulled the roof cables through the PVC route with fish tape.
  2. I fitted plastic trim around the roof opening where the wires entered the van.
  3. I completed the remaining light connections, covered the boxes and joined the final conduit sections.
The trimmed roof opening where my cable groups enter the van.
The trimmed roof opening where my cable groups enter the van.
The roof at the end of my Roof Wiring and Devices Project Day 8 wiring session.
The roof at the end of my Roof Wiring and Devices Project Day 8 wiring session.
Hopkins 47185 Multi-Tow Trailer Adapter

My Takeaway for the Build

The roof-electronics job involved organizing leads as well as mounting the visible equipment. For my Hopkins purchase, the useful comparison is the dual-outlet housing and the extra wire leads behind it. Both alternatives combine seven-blade and four-flat outlets, with bracket and housing shape affecting the surrounding layout.

Product Details And Van-Build Uses

SpecificationProduct Detail
Model47185
OutletsSeven-blade and four-flat
ConnectionsFour-flat input plus separate wire leads

The 47185 groups seven-blade and four-flat trailer outlets in one adapter assembly. Its original instruction diagram identifies the lighting connections and the additional auxiliary-power, electric-brake and reverse leads. Those extra functions are separate from the four-flat lighting connection, an important distinction when organizing a van’s towing equipment. For maintenance, the diagram provides a function-based reference for tracing the connector rather than relying on wire color alone. Keeping that drawing with the adapter record is useful when comparing trailer plugs, replacing an outlet assembly or revisiting a harness after other vehicle wiring has been moved.

Download Hopkins 47185 Wiring Instructions (PDF)

Siemens Q115: Fifteen-Amp Breaker Specifications

Does A Four-Flat Connection Supply Every Seven-Blade Function?

No. The 47185 diagram shows separate leads for auxiliary power, electric-brake control and reverse in addition to the lighting connections.

Alternative products

Two Alternatives to Compare

The CURT and MECMO alternatives also combine seven-blade and four-flat outputs. Housing layout, mounting bracket arrangement and the supplied wire leads are the practical comparison points.

ProductWhat distinguishes itPurchase link
Hopkins 47185 Multi-Tow Trailer AdapterCombined seven-blade and four-flat outlets with additional leads.View on Amazon
CURT 57672 Dual-Output Trailer Adapter (alternative)Dual-output adapter with wire leads and metal bracket.View on Amazon
MECMO Dual-Output Trailer Adapter (alternative)Dual-output housing with leads and mounting bracket.View on Amazon
CURT 57672 Dual-Output Trailer Adapter

CURT 57672 Dual-Output Trailer Adapter

The CURT 57672 combines four-flat and seven-blade trailer outlets. It includes wire leads and a metal mounting bracket for the vehicle-side connection.

View on Amazon
MECMO Dual-Output Trailer Adapter

MECMO Dual-Output Trailer Adapter

This MECMO assembly combines seven-blade and four-flat vehicle-side outlets. It includes wire leads and a mounting bracket for the dual-output housing.

View on Amazon

← All electrical & wiring