Black receptacles were among the electrical finish components I purchased for the van. They belong to the visible control-and-outlet side of the kit, rather than the roof boxes shown in my wiring diary.
The larger roof enclosure during my cable-entry work.
The item in my kit
I bought KCMYTONER Black GFCI Receptacles as part of my camper van equipment.
Black receptacles were among the electrical finish components I purchased for the van. They belong to the visible control-and-outlet side of the kit, rather than the roof boxes shown in my wiring diary.
Where it fits my build
I brought the roof light wires and camera cables into a PVC conduit layout. That work included drilled enclosures, threaded fittings, cable glands, solder-seal splices and grouped wiring.
During the small-box stage, I drilled for a male PVC fitting and used a fitting inside as a retaining nut. I routed the camera cable through a gland into a tee and brought the light-wire groups toward the van entry.
A grouped roof-wire connection before the final conduit work.
My build notes
The wiring project was a sequence of individual connections and routes. The photographs show the intermediate stages, including open boxes and wrapped wire groups, before the remaining covers and conduit joints were finished.
I built the cable route a section at a time, bringing local connections into the larger conduit system.
Alternative products
Two alternatives to compare
Leviton GFWT1-E and ELEGRP offer other black 15-amp GFCI receptacles; face layout, wall-plate design and body depth are useful physical differences to compare.
Leviton GFWT1-E Black GFCI
This black 15-amp GFCI receptacle has front-mounted test and reset controls. Its face includes a status indicator beside the outlet openings.
