I bought Leviton 5320-WMP White Duplex Receptacles as part of my camper van equipment.
These Leviton receptacles are part of my purchases for the van's electrical fittings and interior finish.
Where it fits my build
I brought the roof light wires and camera cables into a PVC conduit layout. That work included drilled enclosures, threaded fittings, cable glands, solder-seal splices and grouped wiring.
During the small-box stage, I drilled for a male PVC fitting and used a fitting inside as a retaining nut. I routed the camera cable through a gland into a tee and brought the light-wire groups toward the van entry.
The larger roof enclosure during my cable-entry work.A grouped roof-wire connection before the final conduit work.
My build notes
The wiring project was a sequence of individual connections and routes. The photographs show the intermediate stages, including open boxes and wrapped wire groups, before the remaining covers and conduit joints were finished.
I built the cable route a section at a time, bringing local connections into the larger conduit system.
Alternative products
Two alternatives to compare
The Eaton white duplex receptacle provides another conventional outlet format. The black ELEGRP alternative adds front-mounted GFCI test and reset controls and changes the visible finish.
Eaton White Duplex Receptacle
This white duplex receptacle provides two outlet positions in a single-gang format. Its conventional face has a central mounting point for the wall plate.
