Electrical & Wiring · My build kit

Leviton Decora Midway Wallplates

Wallplates are a small part of my interior electrical purchases, connected to how the finished surfaces would meet the devices.

By · Camper Van Freedom

Read my build notes ↓

The Item in My Kit

I bought Leviton Decora Midway Wallplates as part of my camper van equipment.

Wallplates are a small part of my interior electrical purchases, connected to how the finished surfaces would meet the devices.

The Visible Plate Around an Interior Fitting

  1. I used SketchUp to plan the interior and put body openings ahead of the framing, floor and wall panels.
  2. My Interior Preparation notes included the shower drain and openings for three water tanks in that preparation sequence.
  3. I removed cargo tie-down hardware for later framing mounts and door trim for the later insulation and paneling.
The cargo floor during my preparation session before sound deadening.
The cargo floor during my preparation session before sound deadening.
Removing stuck-on residue during the floor cleanup.
Removing stuck-on residue during the floor cleanup.
Leviton Decora Midway Wallplates

My Takeaway for the Build

I removed trim and planned the interior before installing the later panels. The Leviton purchase deals with the visible finish around a decorator-style opening. Its midway-size nylon plate differs from the standard ENERLITES shape, while Lutron uses a screwless outer face, making outline and visible fasteners clear comparison points.

Product Details And Van-Build Uses

SpecificationProduct Detail
Purchased PackagePJ26-WM ten-pack
Plate FamilyPJ26-W
OpeningOne Decora/GFCI device
MaterialWhite thermoplastic nylon

The PJ26-WM package supplies ten midway-size Decora wallplates. Leviton’s PJ26-W reference describes the individual white thermoplastic-nylon plate, while the exact package reference preserves the ten-pack identity. The midway outline covers a larger area around the device than a standard plate. In a camper-van interior, the useful layout details are the visible plate edges, nearby trim and access to the mounting screws. Those measurements belong with the finished wall or cabinet face rather than just the device opening. This also distinguishes the purchased visible-screw plate from the screwless alternative already shown here.

Manufacturer Product Reference

Siemens Q115: Fifteen-Amp Breaker Specifications

Leviton PJ26-WM Exact Ten-Pack Reference

Does PJ26-WM Identify A Different Opening Shape?

The purchased package is a ten-pack of midway Decora/GFCI wallplates. The individual plate family is PJ26-W.

Alternative products

Two Alternatives to Compare

ENERLITES supplies a standard decorator plate with visible mounting screws. Lutron Claro uses a screwless outer plate, changing the appearance of the finished device opening.

ProductWhat distinguishes itPurchase link
Leviton Decora Midway WallplatesWhite midway-size nylon decorator plates in a ten-pack.View on Amazon
ENERLITES White Decorator Wallplate (alternative)Standard decorator plate with visible screws.View on Amazon
Lutron Claro White Wallplate (alternative)Decorator plate with a screwless outer cover.View on Amazon
ENERLITES White Decorator Wallplate

Enerlites White Decorator Wallplate

This white plate surrounds one decorator-style switch or outlet opening. Visible mounting screws secure the glossy cover over the device.

View on Amazon
Lutron Claro White Wallplate

Lutron Claro White Wallplate

This white Claro wallplate surrounds one decorator-style opening. A separate outer cover gives the installed plate a screwless face.

View on Amazon

← All electrical & wiring