Small electrical parts were a recurring part of the van's materials list. The MulWark assortment gave my purchased kit a dedicated box for blade fuses, alongside the separate fuse blocks and wiring components.
The larger roof enclosure during my cable-entry work.
The item in my kit
I bought MulWark Standard Blade Fuse Assortment as part of my camper van equipment.
Small electrical parts were a recurring part of the van's materials list. The MulWark assortment gave my purchased kit a dedicated box for blade fuses, alongside the separate fuse blocks and wiring components.
Where it fits my build
I brought the roof light wires and camera cables into a PVC conduit layout. That work included drilled enclosures, threaded fittings, cable glands, solder-seal splices and grouped wiring.
During the small-box stage, I drilled for a male PVC fitting and used a fitting inside as a retaining nut. I routed the camera cable through a gland into a tee and brought the light-wire groups toward the van entry.
A grouped roof-wire connection before the final conduit work.
My build notes
The wiring project was a sequence of individual connections and routes. The photographs show the intermediate stages, including open boxes and wrapped wire groups, before the remaining covers and conduit joints were finished.
I built the cable route a section at a time, bringing local connections into the larger conduit system.
Alternative products
Two alternatives to compare
Nilight pairs standard blade fuses with inline holders, while the 140-piece alternative combines standard and mini blade formats; the box contents differ as well as the fuse counts.
Nilight Blade Fuses and Inline Holders
This kit combines a standard blade-fuse assortment with inline fuse holders. The holders have attached wire leads for individual fuse positions.
