The Nilight plug is another replaceable cord end in my camper equipment purchases. It sits alongside the Veepeak version and the complete RV extension cord in the kit.
The larger roof enclosure during my cable-entry work.
The item in my kit
I bought Nilight TT-30P Replacement Plug as part of my camper van equipment.
The Nilight plug is another replaceable cord end in my camper equipment purchases. It sits alongside the Veepeak version and the complete RV extension cord in the kit.
Where it fits my build
I brought the roof light wires and camera cables into a PVC conduit layout. That work included drilled enclosures, threaded fittings, cable glands, solder-seal splices and grouped wiring.
During the small-box stage, I drilled for a male PVC fitting and used a fitting inside as a retaining nut. I routed the camera cable through a gland into a tee and brought the light-wire groups toward the van entry.
A grouped roof-wire connection before the final conduit work.
My build notes
The wiring project was a sequence of individual connections and routes. The photographs show the intermediate stages, including open boxes and wrapped wire groups, before the remaining covers and conduit joints were finished.
I built the cable route a section at a time, bringing local connections into the larger conduit system.
Alternative products
Two alternatives to compare
Camco Power Grip and Veepeak provide two other handled TT-30P replacement plugs, with differences in body shape and grip design.
Camco Power Grip TT-30P Plug
This replacement RV plug uses the TT-30P three-prong pattern. A shaped grip on the housing helps handle the cord end.
