I bought the Nilight panel for the electrical parts collection behind my van build. Its labeled circuit positions address organization at the distribution end, while my roof diary follows the wiring from individual lights and cameras toward the van entry.
The larger roof enclosure during my cable-entry work.
The item in my kit
I bought Nilight Twelve-Way Fuse Block as part of my camper van equipment.
I bought the Nilight panel for the electrical parts collection behind my van build. Its labeled circuit positions address organization at the distribution end, while my roof diary follows the wiring from individual lights and cameras toward the van entry.
Where it fits my build
I brought the roof light wires and camera cables into a PVC conduit layout. That work included drilled enclosures, threaded fittings, cable glands, solder-seal splices and grouped wiring.
During the small-box stage, I drilled for a male PVC fitting and used a fitting inside as a retaining nut. I routed the camera cable through a gland into a tee and brought the light-wire groups toward the van entry.
A grouped roof-wire connection before the final conduit work.
My build notes
The wiring project was a sequence of individual connections and routes. The photographs show the intermediate stages, including open boxes and wrapped wire groups, before the remaining covers and conduit joints were finished.
I built the cable route a section at a time, bringing local connections into the larger conduit system.
Alternative products
Two alternatives to compare
Blue Sea's ST Blade panel and the Kohree twelve-way block offer other covered blade-fuse layouts; the Kohree listing includes an assortment of fuses, while the Blue Sea listing separates the fuses from the panel.
Blue Sea Twelve-Circuit ST Blade Block
This twelve-circuit blade-fuse block includes a negative bus and a removable cover. Its terminal rows group branch wiring around the fuse positions.
