My purchase list separates this quarter-inch-stud lug from the 5/16-inch version. That small hole-size difference matters when keeping similar-looking connection parts organized.
The larger roof enclosure during my cable-entry work.
The item in my kit
I bought SELTERM 4-AWG Quarter-Inch Cable Lugs as part of my camper van equipment.
My purchase list separates this quarter-inch-stud lug from the 5/16-inch version. That small hole-size difference matters when keeping similar-looking connection parts organized.
Where it fits my build
I brought the roof light wires and camera cables into a PVC conduit layout. That work included drilled enclosures, threaded fittings, cable glands, solder-seal splices and grouped wiring.
During the small-box stage, I drilled for a male PVC fitting and used a fitting inside as a retaining nut. I routed the camera cable through a gland into a tee and brought the light-wire groups toward the van entry.
A grouped roof-wire connection before the final conduit work.
My build notes
The wiring project was a sequence of individual connections and routes. The photographs show the intermediate stages, including open boxes and wrapped wire groups, before the remaining covers and conduit joints were finished.
I built the cable route a section at a time, bringing local connections into the larger conduit system.
Alternative products
Two alternatives to compare
The other SELTERM pack keeps the 4-AWG barrel but changes the stud hole to 5/16 inch, while TKDMR supplies a mixed-size lug assortment with tubing.
SELTERM 4-AWG 5/16-Inch Cable Lugs
These tinned copper ring lugs have barrels sized for 4-AWG cable and holes for 5/16-inch studs. Their ring ends provide a bolted cable termination.
