My electrical kit includes supplies for both in-line splices and bolted wire ends. The TKDMR assortment belongs to that second group, with the roof-wiring photos showing the wider connection work around the van.
The larger roof enclosure during my cable-entry work.
The item in my kit
I bought TKDMR Cable Lug and Heat-Shrink Kit as part of my camper van equipment.
My electrical kit includes supplies for both in-line splices and bolted wire ends. The TKDMR assortment belongs to that second group, with the roof-wiring photos showing the wider connection work around the van.
Where it fits my build
I brought the roof light wires and camera cables into a PVC conduit layout. That work included drilled enclosures, threaded fittings, cable glands, solder-seal splices and grouped wiring.
During the small-box stage, I drilled for a male PVC fitting and used a fitting inside as a retaining nut. I routed the camera cable through a gland into a tee and brought the light-wire groups toward the van entry.
A grouped roof-wire connection before the final conduit work.
My build notes
The wiring project was a sequence of individual connections and routes. The photographs show the intermediate stages, including open boxes and wrapped wire groups, before the remaining covers and conduit joints were finished.
I built the cable route a section at a time, bringing local connections into the larger conduit system.
Alternative products
Two alternatives to compare
AKEOIL and Haisstronica provide alternative assortments of lugs and tubing. Cable size and ring opening are separate dimensions to compare across the kits.
AKEOIL Cable Lug and Heat-Shrink Kit
This AKEOIL assortment combines ring-style cable lugs with heat-shrink tubing. The lug barrels terminate cable ends while the rings provide a bolted attachment point.
