The roof light frame used short pieces joined to a longer extrusion. These T-shaped plates are part of my purchased connector selection for bringing a branch into a straight run.
I bought Befenybay Black T-Shaped Joining Plates as part of my camper van equipment.
The roof light frame used short pieces joined to a longer extrusion. These T-shaped plates are part of my purchased connector selection for bringing a branch into a straight run.
Planning the Junction Before the Slot Nuts Go In
I made three drilled connectors for the light-bar beam.
The rack nuts had to enter through a wider slot opening.
I undid already-tightened bolts when I needed to insert another rack nut.
The profiles and joint hardware during my roof-mount assembly.The drilled connectors and fasteners joining my added extrusion to the roof rack.
My Takeaway from This Job
The slot-nut insertion order mattered before the frame was fully assembled. These T-shaped plates are a separate connector purchase; the alternatives group that general plate format with M5 screws and sliding nuts.
The slot-nut insertion order can change the assembly sequence.
Product Details And Van-Build Uses
Specification
Product Detail
Shape
Flat T plate
Holes
Five
Finish
Black
The T-shaped plate places fastening points across a three-way rail junction. Match the plate outline to the actual rail arrangement before assigning the slot nuts. A van cabinet or equipment frame may have panels close to the joint, so include the driver approach and nearby edges in the drawing. Keeping the five-hole plate reference with that layout also makes it easier to distinguish the T junction from the L-shaped corner plates stored in the same hardware kit.
It places fastening positions across the outside face of a three-way rail junction.
Alternative products
Two Alternatives to Compare
Both alternatives bundle T-shaped plates with slot nuts and screws. The included attachment hardware distinguishes the kits from a plate-only purchase.
