Cabinet gas struts were part of the interior-hardware purchases collected for the van.
The featured Amazon option is Vepagoo Seven-Inch Cabinet Gas Struts.
Panel Movement and Gas-Strut Geometry
I planned the storage assembly and simulated the roof dimensions on the patio.
I built the timber drawer frame and base, then cut the rubber lining with scissors.
I fitted the lining with adhesive, screws and washers before attaching the slides to the drawer and cabinet.
The measured timber drawer frame on my patio.The drawer after I fitted its rubber lining.
My Takeaway for the Build
Building the storage assembly meant allowing for moving parts as well as the fixed frame. For the gas-strut purchase, length, force and end fittings are separate details. The featured compact supports differ from the Douper drop-leaf springs, whose downward-opening arrangement changes the movement being controlled.
Product Details And Van-Build Uses
Specification
Product Detail
Current Option
Vepagoo pair
Length Format
Seven inches
Force Label
18 lb
The current Vepagoo option groups seven-inch struts with mounting brackets and an eighteen-pound force label. Those details describe this particular option rather than every cabinet lift support. A van cabinet drawing should show both attachment points and the lid in its open and closed positions. Keep the actual lid dimensions and movement with that sketch so the strut reference remains connected to the complete assembly, while the original purchase history stays separate above.
No. Record the force label, mounting geometry and actual lid movement as separate details.
Alternative products
Two Alternatives to Compare
The featured Vepagoo pair is seven inches long and labelled eighteen pounds. The other Vepagoo includes mounting brackets, while the Douper 100N springs are designed for downward-opening doors or drop leaves; movement direction, length and force are separate characteristics.
Product
What distinguishes it
Purchase link
Vepagoo Seven-Inch Cabinet Gas Struts
Seven-inch strut pair with brackets and eighteen-pound label.
These gas struts provide lifting assistance through a pressurized cylinder and rod. The included brackets attach the strut ends to a moving panel and its support.
This pair of Douper gas springs is designed for downward-opening cabinet doors and drop leaves. Each spring is listed at 100 newtons, with a mounting arrangement intended to control the opening movement.