Galvanized tie plates were among the small connection pieces in my framing purchases.
The featured Amazon option is Simpson Strong-Tie TP37 Tie Plate.
Plate Length Across a Fabricated Joint
I cut and drilled aluminum pieces for the roof-camera and light mounts.
I adjusted attachment holes while bringing the assemblies together on the profiles.
I coated the camera-mount pieces black during the fabrication sequence.
A black-coated bracket from my roof camera-mount work.The camera mounting arrangement with its drilled attachments.
My Takeaway for the Build
My roof-camera mounts involved joining drilled pieces before the final coating. The tie-plate purchase leads to flat joining hardware with different outlines. TP37 is longer than the TP35 in my record, while the other plates change length, width and finish; those dimensions determine how the holes span a joint.
Product Details And Van-Build Uses
Specification
Product Detail
Current Option
Simpson Strong-Tie TP37
Form
Flat rectangular plate
Holes
Pre-punched fastening pattern
The TP37 option spans a flat surface rather than turning around a corner. Place its outline over the planned joint and record the actual hole positions with the pieces being joined. For a van hardware list, keep the current plate identity separate from the original tie-plate purchase history. The flat connector, selected fasteners and project materials form the complete physical arrangement, so the plate outline alone is not a description of the finished custom assembly.
It spans adjoining pieces across a flat face instead of forming a right angle between two faces.
Alternative products
Two Alternatives to Compare
The TP37 is a longer plate than the TP35 format recorded in my purchases. The galvanized five-and-one-half-inch plates and black Suiwotin brackets provide two other flat joining formats.
This pack contains ten flat galvanized-steel mending plates. The five-and-one-half-inch plates provide pre-punched locations for fastening across a joint.
This set contains four black stainless-steel mending plates with screws. Each four-by-two-inch plate provides a flat connection across adjoining pieces.