Fasteners & Mounting · My build kit

Jewel City Black T50 Staples

My lining and fastening purchases include staples alongside screws and adhesives. The drawer diary shows the practical sequence of fitting a lining, while these black staples are part of the broader purchased fastening kit.

By · Camper Van Freedom

Read my build notes ↓

The Item in My Kit

I bought Jewel City Black T50 Staples as part of my camper van equipment.

My lining and fastening purchases include staples alongside screws and adhesives. The drawer diary shows the practical sequence of fitting a lining, while these black staples are part of the broader purchased fastening kit.

Keeping the Lining Sequence and Fastener Choices Clear

  1. I cut the drawer rubber mat with scissors.
  2. I cleaned the wood and applied adhesive in sections, using a roller to press the mat down.
  3. I attached that lining with screws and washers; my broader fastening purchases also included black T50 staples.
The drawer after I fitted its rubber lining.
The drawer after I fitted its rubber lining.
The measured timber drawer frame on my patio.
The measured timber drawer frame on my patio.

My Takeaway from This Job

The drawer notes give a specific adhesive-and-screw sequence for the rubber mat. For the staple supply in my kit, the comparison is a single three-eighth-inch black size, the Arrow T50 format at the same leg length, or an assortment with additional lengths and brads.

My mat installation used adhesive, screws and washers; staple supplies are a separate kit choice.

Product Details And Van-Build Uses

SpecificationProduct Detail
FormatT50
Leg Length3/8 inch
FinishBlack

The black finish and three-eighth-inch legs identify this selection within the T50 staple family. Keep the family and leg length with the matching tool reference when organizing van lining supplies. The covering and backing materials also belong in the project notes because they form the physical stack being fastened. Maintaining those details separately makes it easier to distinguish these strips from the black 71-series upholstery staples and the plain-finish T50 strips elsewhere in the kit.

Exact Retailer Product Reference

Related Build-Kit Reference: Arrow 506IP Three-Eighth-Inch T50 Staples

Are All Black Staple Strips The Same Format?

No. Keep the T50 identity separate from the black 71-series selection.

Alternative products

Two Alternatives to Compare

The Arrow pack offers three-eighth-inch T50 staples in a different finish. The SHALL assortment adds several staple lengths and separate brad nails.

ProductWhat distinguishes itPurchase link
Jewel City Black T50 StaplesBlack T50 staples with three-eighth-inch legsView on Amazon
Arrow Three-Eighth-Inch T50 Staples (alternative)Arrow T50 staples with three-eighth-inch legsView on Amazon
SHALL Staples and Brad Assortment (alternative)Multiple T50 lengths and separate brad nailsView on Amazon
Arrow Three-Eighth-Inch T50 Staples

Arrow Three-Eighth-Inch T50 Staples

These Arrow T50 staples have three-eighth-inch legs. The strips supply repeated fasteners for a matching staple mechanism.

View on Amazon
SHALL Staples and Brad Assortment

SHALL Staples and Brad Assortment

This SHALL kit combines multiple T50 staple lengths with separate brad nails. The assortment offers different fastener shapes and lengths in one supply kit.

View on Amazon

Questions from My Build

Where Did I Build the Drawer?

On the patio during the roof-storage project.

How Did I Cut the Rubber Lining in That Session?

My diary specifically records using scissors.

← All fasteners & mounting