The mixed bungee hooks are among my purchased storage fasteners. My drawer diary shows the attention I gave to the placement of hardware and the space around moving parts as the assembly came together.
I bought Mixed-Size Coated Bungee Hooks as part of my camper van equipment.
The mixed bungee hooks are among my purchased storage fasteners. My drawer diary shows the attention I gave to the placement of hardware and the space around moving parts as the assembly came together.
Comparing One Cord Size with a Mixed Hook Supply
I planned the storage assembly and simulated the roof dimensions on the patio.
I built the timber drawer frame and base, then cut the rubber lining with scissors.
I fitted the lining with adhesive, screws and washers before attaching the slides to the drawer and cabinet.
The drawer after I fitted its rubber lining.The measured timber drawer frame on my patio.
My Takeaway from This Job
The storage build made the position and access of small hardware tangible. The mixed coated hooks keep quarter- and three-eighth-inch cord fittings together, while the other packs concentrate on one size and change the hook body material.
Product Details And Van-Build Uses
Specification
Product Detail
Finish
Black coating
Listed Cord Sizes
1/4 and 3/8 inch
Pack Type
Mixed hook sizes
The hook body, cord opening and finished cord end form one small assembly. Keep the quarter-inch and three-eighth-inch selections separated before building an elastic loop for a van organizer. Sketch the hook position at both ends and the opening needed to attach or release it. Recording the actual cord and hook combination makes it easier to repair the same loop later without treating every coated hook in the mixed pack as the same size.
These molded plastic hooks have fixed-end attachments for quarter-inch shock cord. Their tabbed hook shape provides an alternative to coated wire hooks.
