I bought two-inch aluminum flat bar as part of the metal stock for my camper van project.
The featured Amazon option is M-D Two-Inch Aluminum Flat Bar.
Stock Dimensions Before Cutting a Bracket
I cut and drilled aluminum pieces for the roof-camera and light mounts.
I adjusted attachment holes while bringing the assemblies together on the profiles.
I coated the camera-mount pieces black during the fabrication sequence.
A black-coated bracket from my roof camera-mount work.The camera mounting arrangement with its drilled attachments.
My Takeaway for the Build
I cut and drilled aluminum pieces for the roof-camera mounts, so the starting blank mattered before the hole pattern. The two-inch-bar comparison makes that visible. The long M-D strip and shorter DOUYUDAO and uxcell pieces change how much cutting stock is available and the width and thickness of each finished piece.
Product Details And Van-Build Uses
Specification
Product Detail
Current Option
M-D 62083 anodized aluminum
Dimensions
2 × 1/8 × 96 inches
Flat aluminum bar gives a bracket project a rectangular starting shape rather than an angle or extrusion slot. The current M-D option is two inches wide and one-eighth inch thick, supplied as a ninety-six-inch length. For a custom van bracket, start with the finished outline and hole centers, then mark them on the stock. Width and thickness affect the space the bracket occupies; they do not describe a finished bracket load capacity. Keep the cut-piece drawing with its intended mounting location.
Flat bar has one rectangular section. Angle already has two perpendicular faces, so the starting shape and the resulting mounting layout differ.
Alternative products
Two Alternatives to Compare
The M-D bar is a long strip, while DOUYUDAO supplies shorter pieces and uxcell offers another short-bar set. Length, width and thickness give these options different starting points for cutting brackets.
Product
What distinguishes it
Purchase link
M-D Two-Inch Aluminum Flat Bar
Two-inch-wide, one-eighth-inch-thick bar, 96 inches long.
These aluminum flat bars provide short lengths of rectangular stock for fabrication. Their flat faces can be cut and drilled into small plates and mounting pieces.
These aluminum flat bars provide rectangular metal stock in short lengths. Their thicker profile offers another material blank for making drilled plates and mounting pieces.