A countertop is one of the larger pieces in my interior purchase list. Its overall footprint belongs in the same layout conversation as the framing, storage and access around the living area.
I bought Bme Seventy-Two-Inch Hevea Countertop as part of my camper van equipment.
A countertop is one of the larger pieces in my interior purchase list. Its overall footprint belongs in the same layout conversation as the framing, storage and access around the living area.
A Countertop Panel and the Cut Layout
I planned the storage assembly and simulated the roof dimensions on the patio.
I built the timber drawer frame and base, then cut the rubber lining with scissors.
I fitted the lining with adhesive, screws and washers before attaching the slides to the drawer and cabinet.
The measured timber drawer frame on my patio.The drawer after I fitted its rubber lining.
I used this Bme hevea butcher-block countertop in my van. I cut it down with blades from my WORKPRO set and DEWALT jigsaw wood blades. Both worked, but the cuts were slow through the 1.5-inch-thick wood.
A thick butcher-block top needs its finished outline and openings planned before cutting. Make a full-size pattern for the cabinet run, including wall irregularities and any corner that needs rounding. Transfer that outline with the top supported across its length. Steven’s review records that cutting these thick countertops with jigsaw blades worked but progressed slowly. Keep the sink or other cutouts separate in the layout so enough material remains around the edges and the supporting cabinet faces.
It records the wall shape, overhangs and openings before the heavy top is cut and fitted into the van.
Alternative products
Two Alternatives to Compare
The CONSDAN maple alternatives come in forty-eight-inch and seventy-two-inch lengths with an oil finish. Length, wood species and unfinished versus prefinished surfaces are the main differences from the hevea panel.
This CONSDAN panel uses solid maple in a seventy-two-by-twenty-five-inch countertop format. Its oil finish provides a prefinished alternative to an unfinished panel.