Plumbing & Water · My build kit

SEAFLO Compact Accumulator Tank

I bought the compact SEAFLO accumulator with my plumbing equipment. My build planning put the tanks and their openings ahead of finished surfaces, leaving room to organize the smaller components around them.

By · Camper Van Freedom

Read my build notes ↓

The Item in My Kit

I bought SEAFLO Compact Accumulator Tank as part of my camper van equipment.

I bought the compact SEAFLO accumulator with my plumbing equipment. My build planning put the tanks and their openings ahead of finished surfaces, leaving room to organize the smaller components around them.

Accumulator Size Within the Water-Equipment Layout

  1. I used SketchUp to plan the interior and put body openings ahead of the framing, floor and wall panels.
  2. My Interior Preparation notes included the shower drain and openings for three water tanks in that preparation sequence.
  3. I removed cargo tie-down hardware for later framing mounts and door trim for the later insulation and paneling.
Removing stuck-on residue during the floor cleanup.
Removing stuck-on residue during the floor cleanup.
The cargo floor during my preparation session before sound deadening.
The cargo floor during my preparation session before sound deadening.

My Takeaway for the Build

My tank-opening plan put the water system into the build before the finished floor and panels. For this SEAFLO purchase, the useful distinction is how much space the accumulator occupies beside the pump. The two-gallon alternative is a larger vessel, while Shurflo keeps a compact format with a different connection layout.

Product Details And Van-Build Uses

SpecificationProduct Detail
ModelSFAT-075-125-01
Internal Volume0.75 L
Factory Precharge10 PSI
Maximum Pressure Rating125 PSI

An accumulator contains an air cushion separated from the water by an internal bladder. The SEAFLO manual describes how that cushion can smooth pressure changes in a compatible pump system. The tank’s 0.75-liter internal volume is different from the amount of water it releases during a particular pressure cycle. Its factory precharge is also different from its maximum pressure rating. For a van water-equipment layout, access to the air valve matters because precharge is part of setup and later maintenance. Whether an accumulator belongs in a particular arrangement follows the pump’s instructions; the SHURFLO 4008 by-pass manual states that one is not required.

Manufacturer Product Reference

Download SEAFLO Pressurized Accumulator Tank Manual (PDF)

SHURFLO 4008 By-Pass Pump Reference

Is The 125 PSI Rating The Factory Precharge?

No. The manual lists a 10 PSI factory precharge and a separate 125 PSI maximum pressure rating.

Alternative products

Two Alternatives to Compare

SEAFLO's two-gallon tank occupies substantially more space. The Shurflo 182-200 stays in the compact format, with a different body and connection layout.

ProductWhat distinguishes itPurchase link
SEAFLO Compact Accumulator TankCompact bladder accumulator with water connection.View on Amazon
SEAFLO Two-Gallon Accumulator Tank (alternative)Larger separate two-gallon accumulator tank.View on Amazon
Shurflo 182-200 Accumulator Tank (alternative)Compact diaphragm accumulator with a different body layout.View on Amazon
SEAFLO Two-Gallon Accumulator Tank

SEAFLO Two-Gallon Accumulator Tank

This accumulator places a larger pressurized volume in a separate tank. Its threaded water connection sits beneath the rounded body.

View on Amazon
Shurflo 182-200 Accumulator Tank

Shurflo 182-200 Accumulator Tank

This compact accumulator contains a diaphragm inside its molded body. It adds a small pressurized volume to a pump-fed water system.

View on Amazon

← All plumbing & water