The original PDF linked here is titled Passenger Side Register. Although this page's original title mentions the glove-box area, the document concerns the passenger-side air register and the surrounding access work. Use that distinction when choosing a reference for the task you actually need.
Identify the source document
The PDF is headed 2023 Transit, section 412-00, Climate Control System General Information, with a procedure revision of November 24, 2021. Its illustrations show the passenger-side dashboard, trim and register. The vehicle heading and revision date identify the archived source.
Read the prerequisite cross-references
The opening page references the right-hand A-Pillar Trim Panel procedure in section 501-05 and the Passenger Airbag procedure in section 501-20B, Supplemental Restraint System.
Find the document sections
- Page 1: the prerequisite references and an illustration of the passenger-side trim/cup-holder area.
- Page 2: additional trim and finish-panel illustrations.
- Page 3: the register illustration and installation statement.
- Page 4: no additional procedure text in this archived copy.
Define the access question before scheduling work
Record whether the intended job concerns the air register, glove box, adjacent trim or an added accessory. Photograph the current arrangement and list the documents needed for that specific task. Similar location names can conceal different procedures, so keep the exact document title beside each reference in the job record.
If a conversion fitting affects access, describe it separately from the factory components. Use the decision log for the unresolved question and the build cost worksheet to record the scope of any proposed professional work. Keep the PDF available as a source reference, with its cross-referenced procedures clearly marked as separate requirements.
Reference guide expanded October 20, 2026. Original publication date and archived references retained.