Cutting & Abrasives · My build kit

Idemeet 24-by-36-Inch Cutting Mat

Cutting the drawer lining required transferring the frame dimensions to a flat sheet. This cutting mat is part of my purchased layout equipment for sheet and fabric work.

By · Camper Van Freedom

Read my build notes ↓

The Item in My Kit

I bought Idemeet 24-by-36-Inch Cutting Mat as part of my camper van equipment.

Cutting the drawer lining required transferring the frame dimensions to a flat sheet. This cutting mat is part of my purchased layout equipment for sheet and fabric work.

Transferring Drawer Dimensions to the Lining Sheet

  1. I measured the drawer frame and fitted its base.
  2. I measured and cut the rubber mat with scissors.
  3. My sheet-layout purchases also included a gridded twenty-four-by-thirty-six-inch cutting mat.
The drawer after I fitted its rubber lining.
The drawer after I fitted its rubber lining.
The measured timber drawer frame on my patio.
The measured timber drawer frame on my patio.

My Experience With This Tool

By

My hunting knives, utility knives and Fiskars rotary cutter were going through the carpet and damaging whatever was underneath. I bought this cutting mat to put under the carpet while I cut it, and it worked well for that job.

The mat took the cuts from the tools instead of the surface underneath. I have not used the printed measurements yet, although I can see how they could be useful.

Watch My Idemeet Cutting Mat Review

How I used the Idemeet mat beneath the carpet I was cutting, the different roles of the mat and Fiskars cutter, and two mat alternatives to compare.

Read the Video Transcript

Hey, I’m Steve Smith with Camper Van Freedom. This Idemeet twenty-four-by-thirty-six-inch cutting mat solved a simple problem while I was cutting carpet for my van: my tools were cutting into whatever was underneath it.

My cutting tools, including my Fiskars rotary cutter, could go through the carpet and damage the surface below. So I bought this mat to put under the carpet while I cut it.

That changed where the cut ended up. The carpet sat on top, the mat was underneath, and the mat took the cuts from the tools instead of the surface below it. It worked well for that job in my build.

The Fiskars sixty-millimeter rotary cutter was another useful part of that carpet-cutting setup. I used it for the carpet on my van walls and ceiling, and found it faster and straighter than the way I had been cutting before. The cutter and the mat had different roles: one made the cut, and the other provided the surface beneath the material.

The mat has printed measurements, but I haven’t used those markings yet. What I’m describing here is my experience of putting a cutting surface beneath the carpet. The full review also lists matching-size Fiskars and OLFA mats as alternatives to compare.

Thanks for watching. I’m Steve Smith with Camper Van Freedom. My takeaway from the Idemeet mat is that it took the cuts instead of the surface underneath my carpet. Read the full review for my experience, the product links and the related cutting tools. See you on the next project.

Product Details And Van-Build Uses

SpecificationProduct Detail
Scale size24 × 36 inches
ConstructionFive-ply cutting board
SurfacePrinted measurement grid

A large rotary cutting mat provides a repeatable flat layout for fabric and carpet pieces. Put the material down without tension, align one edge with the grid and check the full outline before cutting. For insulated covers, a paper pattern keeps the window shape separate from seam allowances and attachment tabs. The mat’s usable scale size needs support across the working table so the material stays flat. Store the pattern and labeled offcuts together when several similar covers belong to different openings.

Exact Retailer Product Reference

Related: Moonshan Bag-Closing Thread

Why Keep Seam Allowance Separate From The Window Pattern?

The visible opening, finished cover edge and stitching allowance are different outlines and need to be transferred deliberately.

Alternative products

Two Alternatives to Compare

Fiskars and OLFA offer mats in the same nominal working size. Their printed grids and angle guides provide different layouts for measuring and aligning material.

ProductWhat distinguishes itPurchase link
Idemeet 24-by-36-Inch Cutting MatTwenty-four-by-thirty-six-inch gridded cutting surfaceView on Amazon
Fiskars 24-by-36-Inch Cutting Mat (alternative)Same nominal size with double-sided grid and angle linesView on Amazon
OLFA 24-by-36-Inch Cutting Mat (alternative)Same nominal size with double-sided measurement layoutView on Amazon
Fiskars 24-by-36-Inch Cutting Mat

Fiskars 24-by-36-Inch Cutting Mat

This Fiskars mat provides a double-sided gridded surface for rotary cutting. Its printed angle lines help align fabric and other craft materials.

View on Amazon
OLFA 24-by-36-Inch Cutting Mat

Olfa 24-by-36-Inch Cutting Mat

This OLFA cutting mat provides a large gridded working surface. Its double-sided layout offers measurement references for rotary-cutting projects.

View on Amazon

Questions From My Build

Why Did I Buy This Cutting Mat?

My knives and Fiskars rotary cutter were going through the carpet and damaging the surface underneath. The mat took those cuts instead and worked well for that job.

Did I Use The Printed Measurements?

I have not used the printed measurements yet. My experience was using it underneath the carpet while cutting.

Related Reviews From My Build

← All cutting & abrasives