The roof wiring involved making openings in boxes before adding fittings and glands. This hole-saw kit is part of my purchased cutting tools for comparing circular-hole formats.
The larger roof enclosure during my cable-entry work.
The item in my kit
I bought KATA Hole Saw Kit as part of my camper van equipment.
The roof wiring involved making openings in boxes before adding fittings and glands. This hole-saw kit is part of my purchased cutting tools for comparing circular-hole formats.
Where it fits my build
I brought the roof light wires and camera cables into a PVC conduit layout. That work included drilled enclosures, threaded fittings, cable glands, solder-seal splices and grouped wiring.
During the small-box stage, I drilled for a male PVC fitting and used a fitting inside as a retaining nut. I routed the camera cable through a gland into a tee and brought the light-wire groups toward the van entry.
A grouped roof-wire connection before the final conduit work.
My build notes
The wiring project was a sequence of individual connections and routes. The photographs show the intermediate stages, including open boxes and wrapped wire groups, before the remaining covers and conduit joints were finished.
I built the cable route a section at a time, bringing local connections into the larger conduit system.
Alternative products
Two alternatives to compare
Luckyway offers another hole-saw assortment. The DEWALT kit supplies a different selection of saw diameters with mandrels and pilot bits.
Luckyway Hole Saw Kit
This Luckyway set groups circular hole saws with supporting mandrels and pilot bits. The assortment supplies several diameters for cutting round openings.
