Cutting & Abrasives · My build kit

Milwaukee Shockwave Titanium Drill-Bit Set

My drill-bit purchases sit alongside the repeated measuring, marking and drilling visible in the bracket work.

By · Camper Van Freedom

Read my build notes ↓

The Item in My Kit

I bought Milwaukee SHOCKWAVE Titanium Drill-Bit Set as part of my camper van equipment.

My drill-bit purchases sit alongside the repeated measuring, marking and drilling visible in the bracket work.

A Drill-Bit Assortment for the Fabrication Stage

  1. I cut and drilled aluminum pieces for the roof-camera and light mounts.
  2. I adjusted attachment holes while bringing the assemblies together on the profiles.
  3. I coated the camera-mount pieces black during the fabrication sequence.
A black-coated bracket from my roof camera-mount work.
A black-coated bracket from my roof camera-mount work.
The camera mounting arrangement with its drilled attachments.
The camera mounting arrangement with its drilled attachments.
Milwaukee SHOCKWAVE Titanium Drill-Bit Set

My Experience With This Tool

By

I do not remember this set costing much more than other drill-bit sets, even though Milwaukee is usually one of the more expensive brands. I like these quick-change hex-shank bits because I can pop them in and out of my DEWALT impact driver instead of loosening and tightening the chuck on my DEWALT drill each time.

My experience with the smaller bits was the same as with other sets: they broke during ordinary drilling, especially when I had to push through a tough hole and the bit bent or went in at an angle.

I have had that experience with Milwaukee, Ryobi and the brands in between. These days I tend to buy the cheapest drill-bit sets because the small bits keep breaking for me, and I do not see a reason to pay extra.

Watch My Milwaukee SHOCKWAVE Drill-Bit Set Review

My narrated review covers the quick-change hex shanks I liked in my impact driver, the smaller bits that still broke and why I now choose cheaper replacement sets.

Review and van-build photographs: Steven Smith / Camper Van Freedom. Product reference images: Milwaukee, DEWALT and Bosch. Illustrative workshop footage: Ono Kosuki / Pexels and Gustavo Fring / Pexels.
Read The Video Transcript

Hi, I'm Steve Smith with Camper Van Freedom. These are the Milwaukee SHOCKWAVE titanium drill bits from my van-build kit. I liked the quick-change hex shanks, but the small bits still broke during ordinary drilling. That combination of convenience and replacement cost is the point of my review.

My recorded purchase is the twenty-three-piece SHOCKWAVE titanium assortment shown here. The manufacturer identifies a quarter-inch hex shank for this bit family. The shank is the connection at the back of the bit; the cutting diameter is a separate dimension. The diagram separates those two parts without confusing the shank size with the hole size.

I could pop these bits in and out of my DEWALT impact driver instead of loosening and tightening a drill chuck each time. That quick-change arrangement was the feature I liked. My related driver page shows a current DEWALT kit buying option, pictured here separately from the history of my original tool.

My bracket photographs provide the build context. I cut and drilled aluminum pieces for roof-camera and light mounts, adjusted attachment holes and coated camera-mount pieces black. The pictures show my actual fabricated parts and mounting arrangement. This workshop footage illustrates measuring and holding a workpiece as the review explains that layout stage.

The small bits were the limitation in my use. They broke during ordinary drilling, especially when a tough hole made the bit bend or enter at an angle. I had similar experiences with other brands too. The quick-change shank made swapping bits convenient, but it did not remove the breakages I was experiencing at the small cutting end.

I do not remember this set costing much more than other drill-bit sets at the time. These days I tend to buy the cheapest sets because the smaller bits keep breaking for me, and I do not see a reason to pay extra. That is my practical buying decision after using them, rather than a current price comparison between stores.

The alternatives on my page are the DEWALT D W thirteen sixty-one titanium-coated set and the Bosch C O fourteen B cobalt set. The DEWALT set is another one I used and reviewed, while the Bosch is a researched buying alternative. Material, assortment and connection details are separate things to compare; the brand name alone does not tell the whole story.

Thanks for watching. I'm Steve Smith with Camper Van Freedom. My full Milwaukee SHOCKWAVE twenty-three-piece review, related driver page, matching pictures and current Amazon buying options are linked below. I liked the quick-change convenience, but my small-bit breakage experience is why I now tend to buy less expensive replacement sets. Until next time.

Watch This Review On YouTube · English Captions (VTT) · Download The Transcript

Product Details And Van-Build Uses

SpecificationProduct Detail
Set Reference48-89-4631
Shank1/4 in hex
CoatingTitanium
Listed MaterialsMetal, wood and plastics

Milwaukee’s SHOCKWAVE titanium drill bits use a quarter-inch hex shank for impact drivers and drill drivers. That connection is useful for the quick-change drilling setup used with quick-change drill bits. The manufacturer identifies metal, wood and plastics as applications, which can cover different small fabrication jobs around a camper-van build. Size markings help separate the bits when planning pilot holes, brackets and hardware openings. The current model reference explains the bit family and its intended materials. The original purchased set and its case remain the recorded items, without treating newer case packaging as evidence of what arrived with my order.

Manufacturer Product Reference

What Connects These Bits To A Quick-Change Driver?

The bits use a quarter-inch hex shank. Milwaukee lists them for impact drivers and drill drivers.

Alternative products

Two Alternatives to Compare

The DEWALT kit uses titanium-coated pilot-point bits, while the Bosch CO14B set uses cobalt bits. The bit material, assortment and point design are the main differences here.

ProductWhat distinguishes itPurchase link
Milwaukee SHOCKWAVE Titanium Drill-Bit SetTwenty-three titanium-coated bits in a storage case.View on Amazon
DEWALT DW1361 Drill-Bit Set (alternative)Titanium-coated drill-bit assortment.View on Amazon
Bosch CO14B Cobalt Drill-Bit Set (alternative)Cobalt drill-bit assortment with case.View on Amazon
DEWALT DW1361 Drill-Bit Set

DEWALT DW1361 Drill-Bit Set

This drill-bit set contains titanium-coated bits in several sizes. The assortment provides cutting tools for making holes during fabrication work.

View on Amazon
Bosch CO14B Cobalt Drill-Bit Set

Bosch CO14B Cobalt Drill-Bit Set

This set contains cobalt drill bits in several sizes and a storage case. The assortment offers another cutting-tool selection for drilling metal parts.

View on Amazon

Questions From My Build

Why Did I Like The Quick-Change Shanks?

I could pop the bits in and out of my DEWALT impact driver rather than loosen and tighten the chuck on my drill each time.

How Did The Smaller Bits Hold Up?

They still broke during ordinary drilling, especially when a tough hole made a bit bend or enter at an angle. That matched my experience with other brands, so I now tend to buy cheaper drill-bit sets.

Related Reviews From My Build

← All cutting & abrasives