I bought this cable-and-lug package as another part of the van equipment collection. The bundled terminals distinguish it from the plain bulk cable purchases recorded elsewhere in the kit.
The larger roof enclosure during my cable-entry work.
The item in my kit
I bought 1/0-AWG CCA Cable and Lug Kit as part of my camper van equipment.
I bought this cable-and-lug package as another part of the van equipment collection. The bundled terminals distinguish it from the plain bulk cable purchases recorded elsewhere in the kit.
Where it fits my build
I brought the roof light wires and camera cables into a PVC conduit layout. That work included drilled enclosures, threaded fittings, cable glands, solder-seal splices and grouped wiring.
During the small-box stage, I drilled for a male PVC fitting and used a fitting inside as a retaining nut. I routed the camera cable through a gland into a tee and brought the light-wire groups toward the van entry.
A grouped roof-wire connection before the final conduit work.
My build notes
The wiring project was a sequence of individual connections and routes. The photographs show the intermediate stages, including open boxes and wrapped wire groups, before the remaining covers and conduit joints were finished.
I built the cable route a section at a time, bringing local connections into the larger conduit system.
Alternative products
Two alternatives to compare
GearIT offers another 1/0 CCA kit with its own cable lengths and termination parts, while TEMCo supplies a red pure-copper bulk cable in the same wire gauge.
GearIT 1/0-AWG CCA Cable Kit
This GearIT kit combines red and black 1/0-AWG copper-clad aluminum cable with lugs and heat-shrink tubing. The cable has translucent insulation around the stranded conductors.
