The roof build brought together cables from several devices before entering the van. This longer loom roll is part of my purchased wire-covering supplies for managing separate runs and branches.
The larger roof enclosure during my cable-entry work.
The item in my kit
I bought 120-Foot Half-Inch Split Wire Loom as part of my camper van equipment.
The roof build brought together cables from several devices before entering the van. This longer loom roll is part of my purchased wire-covering supplies for managing separate runs and branches.
Where it fits my build
I brought the roof light wires and camera cables into a PVC conduit layout. That work included drilled enclosures, threaded fittings, cable glands, solder-seal splices and grouped wiring.
During the small-box stage, I drilled for a male PVC fitting and used a fitting inside as a retaining nut. I routed the camera cable through a gland into a tee and brought the light-wire groups toward the van entry.
A grouped roof-wire connection before the final conduit work.
My build notes
The wiring project was a sequence of individual connections and routes. The photographs show the intermediate stages, including open boxes and wrapped wire groups, before the remaining covers and conduit joints were finished.
I built the cable route a section at a time, bringing local connections into the larger conduit system.
Alternative products
Two alternatives to compare
Both Alex Tech alternatives use the half-inch split format. The longer and shorter roll choices mainly change how much sleeve material is supplied.
Alex Tech Half-Inch Split Wire Loom
This Alex Tech split loom is a corrugated half-inch wire covering supplied in a long roll. The lengthwise opening lets wires enter through the side of the sleeve.
This Alex Tech roll supplies ten feet of half-inch corrugated split loom. The side opening allows the sleeve to be placed around an existing wire bundle.
