My roof route combined rigid conduit with smaller grouped cable sections. Split loom is a separate purchased covering format for the flexible parts of a wiring kit.
The larger roof enclosure during my cable-entry work.
The item in my kit
I bought Alex Tech Half-Inch Split Wire Loom as part of my camper van equipment.
My roof route combined rigid conduit with smaller grouped cable sections. Split loom is a separate purchased covering format for the flexible parts of a wiring kit.
Where it fits my build
I brought the roof light wires and camera cables into a PVC conduit layout. That work included drilled enclosures, threaded fittings, cable glands, solder-seal splices and grouped wiring.
During the small-box stage, I drilled for a male PVC fitting and used a fitting inside as a retaining nut. I routed the camera cable through a gland into a tee and brought the light-wire groups toward the van entry.
A grouped roof-wire connection before the final conduit work.
My build notes
The wiring project was a sequence of individual connections and routes. The photographs show the intermediate stages, including open boxes and wrapped wire groups, before the remaining covers and conduit joints were finished.
I built the cable route a section at a time, bringing local connections into the larger conduit system.
Alternative products
Two alternatives to compare
The 120-foot roll offers another half-inch split-loom supply. The shorter Alex Tech roll keeps the same basic sleeve format with less material in the package.
120-Foot Half-Inch Split Wire Loom
This roll supplies half-inch corrugated split loom for enclosing wire bundles. Its side opening allows the covering to be fitted around wires along a route.
This Alex Tech roll supplies ten feet of half-inch corrugated split loom. The side opening allows the sleeve to be placed around an existing wire bundle.
