This purchase covers the mount and cable rather than the antenna itself. That distinction fits the roof-work sequence in my diary, where brackets, cable routes and the equipment being mounted were separate parts of the job.
I bought Anina NMO Antenna Bracket and Cable as part of my camper van equipment.
This purchase covers the mount and cable rather than the antenna itself. That distinction fits the roof-work sequence in my diary, where brackets, cable routes and the equipment being mounted were separate parts of the job.
Where it fits my build
On Day 95 I moved the Flatline rack cross beams to suit the solar-panel length, then added 2020 extrusion above the existing rack extrusion. I brought two solar panels onto the roof to work through the fit.
That same session included junction-box assembly, cable glands and routing power and Ethernet cables. The physical layout of the rack and the cable routes developed together.
Lights, cables and tools laid out during my roof work.Rack extrusion and mounting hardware during the fitting stage.
My build notes
The roof session took twelve hours, and fitting the panels was only one part of it. Cutting extrusion, positioning brackets and organizing the cables all used the same limited working area.
My useful takeaway from that day is the value of laying out the real parts before settling their positions. Moving a cross beam and checking the panel fit gave me a concrete reference for the next stage.
I worked through panel position, rack spacing and cable routes together on the roof.
Alternative products
Two alternatives to compare
The Eightwood alternative supplies another NMO-to-PL259 cable assembly. The Tram 1250 uses a through-surface roof-mount arrangement, changing the mounting method from the Anina L-bracket.
Eightwood NMO-to-PL259 Antenna Cable
This Eightwood assembly combines an NMO mount with an RG58 extension cable. The other end uses a PL259 connector for the radio connection.
