Holes and cable entries appear throughout my roof-wiring notes. I bought this grommet assortment as part of the electrical supplies, while the diary documents separate glands and fittings at the roof junction boxes.
The larger roof enclosure during my cable-entry work.
The item in my kit
I bought BUSY-CORNER Rubber Grommet Assortment as part of my camper van equipment.
Holes and cable entries appear throughout my roof-wiring notes. I bought this grommet assortment as part of the electrical supplies, while the diary documents separate glands and fittings at the roof junction boxes.
Where it fits my build
I brought the roof light wires and camera cables into a PVC conduit layout. That work included drilled enclosures, threaded fittings, cable glands, solder-seal splices and grouped wiring.
During the small-box stage, I drilled for a male PVC fitting and used a fitting inside as a retaining nut. I routed the camera cable through a gland into a tee and brought the light-wire groups toward the van entry.
A grouped roof-wire connection before the final conduit work.
My build notes
The wiring project was a sequence of individual connections and routes. The photographs show the intermediate stages, including open boxes and wrapped wire groups, before the remaining covers and conduit joints were finished.
I built the cable route a section at a time, bringing local connections into the larger conduit system.
Alternative products
Two alternatives to compare
The Cal-Hawk assortment offers another set of individual rubber grommets, while Link Solar uses a complete two-gland entry housing; these are different approaches to the surrounding panel opening.
Cal-Hawk Rubber Grommet Assortment
This assortment groups rubber panel grommets in several sizes. A divided case separates the different openings.
